Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Dakota pull is a traditional bar pull designed for cabinet drawers and doors where an 8-13/16 inch (224 mm) center-to-center spacing is called for, delivering grip hardware scaled to the front it mounts on.
The 8-13/16 inch (224 mm) center-to-center is a step up from the 7-9/16 inch (192 mm) spacing that serves mid-size drawers. At this span, the pull is proportioned for wide base drawers, deep drawer stacks, full-height pantry doors, and furniture-scale island fronts where a shorter pull would look undersized against the door. Designers who work with the one-third proportioning convention frequently land at this center-to-center on fronts in the 24- to 30-inch range. The 10-1/2 inch overall length carries that scale without dominating the face of the cabinet.
The pull is cast in zinc and finished in Pewter Antique, a hand-finished silver tone with a warm, slightly darkened quality that reads as aged metal rather than polished hardware. The finish settles into the recesses of the bar's profile and posts, which gives a traditional piece depth that a flat matte or bright finish would not. Against painted or stained wood in warm neutrals, greens, and deep blues, Pewter Antique sits comfortably without competing with the cabinetry color. It belongs in the Silver Tone color family, which coordinates with brushed and satin silver fixtures but should be matched within the Dakota series to confirm the look before mixing across brands.
Cabinet shops building furniture-style kitchens, islands, and built-ins with wide drawer banks will find this spacing useful when the hole layout is already specified at 224 mm or when the front width calls for longer hardware. Interior designers specifying traditional or transitional kitchens frequently use this center-to-center on pot drawers, appliance garages, and full-overlay door pairs. Contractors doing a hardware replacement on existing cabinetry drilled to 8-13/16 inch centers can drop this pull in without drilling new holes. Because it is part of the Dakota collection, companion pieces in the same series are available for doors, smaller drawers, and appliance-scale fronts, making it straightforward to run a consistent hardware program across a full kitchen.
Yes. 8-13/16 inches and 224 mm are the same center-to-center dimension, just expressed in different units. Both refer to the distance between the centers of the two mounting holes.
The projection is 1-7/16 inches (37 mm) from the face of the door or drawer front to the back of the bar, which is enough room for a full-hand grip on a wide drawer.
Pewter Antique is a silver-toned finish, not a bronze tone. Whether it reads well alongside oil-rubbed bronze depends on the specific fixtures and the room, but the two are different finish families. Match within the Dakota series for the most reliable result.
Yes. A bar pull of this scale works on both drawer fronts and taller door panels. The 10-1/2 inch overall length is proportioned for fronts where a shorter pull would look undersized.
When the front is large and the hole pattern is already at 224 mm, this Dakota pull delivers the length, projection, and traditional finish character the scale demands, without requiring a compromise on proportion or style.
Sold In: 1 Each