Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Dakota pull is a traditional-style cabinet pull designed for wide drawer fronts, full-height cabinet doors, and anywhere the hardware needs to carry visual weight proportional to a larger front.
At 8 inches center-to-center, this pull belongs on the larger fronts in a kitchen or bath: wide base drawers, deep pot-and-pan drawers, pantry door stiles, and furniture-style islands where a 3 or 5 inch pull would look proportionally slight. Designers commonly scale hardware to roughly a third of the front's width, which means an 8 inch pull suits fronts in the 24 to 30 inch range. That sizing convention is a preference, not a rule, but it explains why this pull reads correctly on a wide front and would feel oversized on a standard 15 inch door.
Because it mounts on drilled holes rather than a routed channel, installation is the same two-hole process as any standard bar pull. The 8 inch spacing is a less common drill pattern than 3-3/4 or 5-1/16 inch, so it is most often a planned installation rather than a drop-in replacement for an existing hole pattern.
The pull is cast in zinc and finished in Oil Rubbed Bronze. Oil Rubbed Bronze is a hand-applied, darkened finish with warm brown undertones and subtle variations across the surface. It is not a uniform flat color: the high points tend to read lighter and the recesses darker, which gives a traditionally styled pull its depth and prevents it from reading as a flat painted finish. Against stained wood cabinetry in cherry, walnut, or dark oak tones, Oil Rubbed Bronze integrates rather than contrasts. Against painted fronts in cream, warm white, or sage, it reads as an accent with enough visual weight to anchor a wide drawer.
Cabinet shops building furniture-style or raised-panel kitchens reach for this pull when the door and drawer program is traditional and the client has specified a bronze or dark-warm metal finish. Designers working on a transitional kitchen often pair this scale of pull on drawers with smaller knobs from the same Dakota collection on doors, keeping the finish language consistent without duplicating the form. Homeowners replacing hardware on an existing kitchen drilled to 8 inch centers will find this a direct fit, though that spacing is less common than 96 mm or 128 mm patterns and worth measuring before ordering.
Center-to-center, 8 inches (203 mm), is the distance between the centers of the two mounting holes and is what you match to your existing holes or your planned drill pattern. The overall length, 8-5/8 inches, is the end-to-end size of the pull itself and determines how much of the front it covers visually.
Yes, in the way a hand-applied finish does. There will be subtle tonal variation across individual pulls, and lighter areas typically appear at the high points of the profile. Pieces within the same production run are closely matched, but Oil Rubbed Bronze is not a uniform flat coating.
Yes. The Dakota collection includes companion knobs and pulls in Oil Rubbed Bronze that share the same design language and finish. Mixing pulls on drawers with knobs on doors within the same series is a standard way to vary the hardware form while keeping the room consistent.
A pull at this center-to-center is proportional to a wider vanity drawer, typically 24 inches or more. On a standard 18 inch vanity drawer it would span most of the front, which reads as oversized in most installations. For narrower vanity drawers, a shorter center-to-center from the Dakota collection is a better fit.
Choose this pull when the cabinetry is large enough to need hardware scaled to match and the finish program calls for a warm, traditionally styled Oil Rubbed Bronze.
Sold In: 1 Each