Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica 9958-99 Antique Rubbed Copper Metal, 48"x96" Metal Finish is a Formica Corporation metal laminate designed to deliver a copper aesthetic in a manageable sheet size for fabrication. This laminate uses a DecoMetal metal laminate construction, which means a polished, anodized, matte, brushed or mirror aluminum or copper sheet is bonded to a phenolic back, so the face presents real metal while the core supports it during fabrication. The sheet size of 48"x96" sets up straightforward layout on common substrates, which helps with planning seams and cuts on vertical projects. The laminate is engineered for vertical interior applications, aligning it with wall panels, fronts, and other upright surfaces rather than horizontal work surfaces. The phenolic back prevents creasing, so the sheet resists kinking as it is handled, and that support allows for improved adhesion to substrates during bonding tasks.
This Formica metal laminate uses a phenolic back that prevents creasing, so the sheet stays flatter as it is moved into place on the substrate, which helps when aligning edges and reveals on vertical interior work. Because the phenolic back allows for improved adhesion to substrates, bond performance responds well to properly applied adhesive systems, which supports dependable attachment on the specified vertical interior surfaces. The 48"x96" Metal Finish format provides a consistent working footprint, so installers can rip or crosscut panels according to their shop standards while keeping the metal face supported by the phenolic back. The laminate is engineered for vertical interior applications, so project planning for panels, casework faces, and similar upright components aligns directly with the product design intent.
This laminate is in the Formica HPL category as a metal laminate, so it fits into projects already using high pressure laminates where a metal aesthetic is needed on selected vertical interior surfaces. The DecoMetal metal laminate description, with aluminum or copper sheet on a phenolic back, places it in decorative surfacing roles where the metal face is seen while the phenolic core supports that face during fabrication and service. The 48"x96" Metal Finish size lets fabricators cut components for vertical interior applications such as wall or panel elements within that footprint, so yield and layout can be organized around standard sheet dimensions. The Antique Rubbed Copper identification ties the appearance to copper within the DecoMetal family, so it supports design schemes that rely on copper-toned surfaces on interior vertical elements.
The web description lists this laminate as GRADE 85 ( .040" ( 1.0 MM ) ) DecoMetal metal laminate, so the nominal thickness of .040 inch, or 1.0 mm, establishes the profile of the sheet as it transitions at edges, which matters when detailing joints to adjacent materials. That same construction uses a phenolic back to prevent creasing, so the metal face is less prone to permanent bends during normal handling, which supports cleaner results when cutting and fitting pieces. Because the phenolic back allows for improved adhesion to substrates, bond strength and uniform contact are supported across the laminate back, which is important for long vertical interior panels where consistent adhesion helps the face follow the substrate. The Formica Corporation brand and part number M99588699408000 identify this exact Antique Rubbed Copper configuration, so ordering and reordering for multi-phase projects can stay tied to the same specification for consistent appearance.
Formica 9958-99 Antique Rubbed Copper Metal, 48"x96" Metal Finish is a Formica Corporation DecoMetal metal laminate, so it serves as a decorative metal-faced laminate sheet for interior vertical surfacing projects.
The product is listed as GRADE 85 ( .040" ( 1.0 MM ) ), so the laminate is approximately .040 inch or 1.0 mm thick, which defines its edge profile and behavior during cutting and bonding.
The laminate is specified as 48"x96" Metal Finish, so it covers a 4-foot by 8-foot area, which matches common panel sizes used for planning cuts and vertical interior layouts.
The DecoMetal construction uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, so the visible surface is real metal supported by a laminate core.
The phenolic back prevents creasing and allows for improved adhesion to substrates, so the sheet handles better during positioning and supports consistent bonding on vertical interior panels.
This Formica metal laminate is engineered for vertical interior applications, so it is intended for upright interior surfaces where a copper metal look is desired within laminate-based projects.
This Formica 9958-99 Antique Rubbed Copper Metal, 48"x96" Metal Finish laminate combines a DecoMetal metal laminate face with a phenolic back that prevents creasing and allows for improved adhesion to substrates, which supports reliable installation on vertical interior applications. The .040 inch (1.0 mm) thickness and 48"x96" format establish predictable cutting, layout, and edge detailing conditions for fabricators working within standard panel dimensions. For projects calling for a copper-faced Formica HPL metal laminate in vertical interior roles, this M99588699408000 configuration offers a defined specification that can be repeated across phases and matching areas.
Sold In: 1 Sheet