Formica 6433-99 Woven Argent Metal gives you a decorative metal laminate in a 48 x 120 inch sheet, so you can skin taller vertical panels and doors in one piece for a clean, continuous appearance on interior projects. This product is part of the DecoMetal metal laminate line, which means you are working with real metal sheet bonded to a stable backer instead of a printed pattern, so the finished surface presents as actual metal in the installation. The sheet uses polished, anodized, matte, brushed or mirror aluminum or copper, so you can coordinate the look with other metal finishes in the same space. A phenolic back is permanently bonded to the metal sheet, which prevents creasing during normal handling and fabrication. That same phenolic back improves adhesion to common substrates, which supports predictable bonding when laminating vertical interior surfaces.
This Formica laminate uses a phenolic back bonded to the metal sheet, so the back side presents as a uniform, stable surface when you are spreading adhesive on large vertical panels. The 48 x 120 inch format covers a broad area per sheet, which reduces seams on tall panels and allows full-height treatments in a single layup. At approximately 0.040 inch, or 1.0 mm, the laminate behaves as a thicker decorative layer compared to standard HPL, which affects how you plan edges, inside corners, and reveals when trimming flush. Being engineered specifically for vertical interior applications, the product is intended for use on wall panels, casework faces, and similar upright surfaces, which guides where you deploy it in a room or commercial build-out.
This Woven Argent metal laminate is engineered for vertical interior applications, so it is suited to wall cladding, column wraps, cabinet faces, and door skins where the surface is upright rather than horizontal. The 48 x 120 inch sheet size supports full-height lobby panels, tall feature walls, and wardrobe or storage fronts without horizontal joints, which simplifies layout when aligning the Woven Argent pattern. Because the face is polished, anodized, matte, brushed or mirror aluminum or copper, it fits projects that call for a metallic design element, such as reception areas, retail displays, and decorative partitions. The laminate construction places the metal sheet over a phenolic back, which lets you work with it using laminate-oriented tooling in a millwork or cabinet shop environment.
The phenolic back on this Formica DecoMetal laminate is designed to prevent creasing, so the metal face stays smooth as you move the 48 x 120 inch sheet from cutting to bonding, which helps limit surface irregularities in the final panel. That same phenolic back improves adhesion to substrates, which supports even bonding across large vertical surfaces and reduces the likelihood of localized lift where full contact is achieved. The approximate 0.040 inch (1.0 mm) overall thickness gives the laminate a noticeable build, so edge treatments, reveals, and transitions can be set with a defined step relative to thinner high-pressure laminates. Working with a metal sheet bonded to phenolic means routing and trimming operations follow laminate-style processes, while the genuine metal face provides the Woven Argent appearance once edges are dressed and panels are installed.
Formica 6433-99 Woven Argent Metal is a DecoMetal metal laminate using polished, anodized, matte, brushed or mirror aluminum or copper sheet bonded to a phenolic back for decorative vertical interior use.
Formica 6433-99 Woven Argent Metal is supplied as a 48 x 120 inch sheet, allowing coverage of tall vertical panels and doors in a single piece for a continuous metal appearance on interior surfaces.
Formica 6433-99 Woven Argent Metal is Grade 85 at approximately 0.040 inch, or 1.0 mm, which provides a substantial decorative metal layer influencing edge and reveal detailing.
Formica 6433-99 Woven Argent Metal is engineered for vertical interior applications, so it is suited to wall panels, cabinet faces, doors, and similar upright decorative surfaces.
Formica 6433-99 Woven Argent Metal uses a phenolic back to prevent creasing of the metal sheet and to improve adhesion to substrates during lamination of vertical interior panels.
The M64338599410000 designation is the manufacturer part number for this specific Formica 6433-99 Woven Argent Metal DecoMetal laminate in the 48 x 120 inch, approximately 1.0 mm thickness format.
Formica 6433-99 Woven Argent Metal combines a genuine aluminum or copper sheet face with a phenolic back in a 48 x 120 inch format, giving you a defined solution for vertical interior panels that require a metallic finish. The approximate 0.040 inch, or 1.0 mm, DecoMetal construction means it installs using laminate-style fabrication while delivering the Woven Argent metal look on finished walls, casework, and doors. For vertical interior surfaces that call for a decorative metal laminate with stable adhesion and a smooth face, this Formica Woven Argent sheet provides the configured size, thickness, and construction to move directly into your lamination workflow.
Sold In: 1 Sheet