Formica 6435-99 Woven Brass Metal, 48"x120" Metal Finish

Formica 6435-99 Woven Brass Metal Laminate Use

Formica 6435-99 Woven Brass Metal laminate is a DecoMetal metal laminate sheet designed for trade-focused vertical interior applications, so it gives casework, walls, and display surfaces a consistent metal look based on a known Formica Corporation specification. This p GRADE 85 laminate has a nominal thickness of 0.040 inch, or 1.0 mm, which creates a metal surfacing layer that works well as a decorative facing rather than a structural panel. The sheet size of 48 x 120 inches lets installers cover taller panels or bank multiple doors with fewer seams, which saves layout time on repetitive runs. The laminate uses a polished, anodized, matte, brushed, or mirror aluminum or copper sheet as the face, so fabrication delivers a true metal surface rather than a printed pattern.

Key Formica Woven Brass Laminate Advantages

• The DecoMetal metal laminate face uses real aluminum or copper sheet, so routed or cut edges present authentic metal character, which matters on exposed ends and reveals in custom millwork.
• The phenolic back is engineered to prevent creasing, so handling full 48 x 120 inch sheets on site or in the shop resists damage during staging and movement through typical laminating workflows.
• The phenolic back allows for improved adhesion to substrates, so contact with standard laminate bonding processes creates a more predictable bond line across the full sheet area.
• The 0.040 inch, or 1.0 mm, thickness gives a substantial decorative layer, so field trimming, routing, and edge-cleanup steps feel familiar to installers used to working with Grade 85 laminates.
• The engineered design targets vertical interior applications, so installers can confidently apply it to panels, fronts, and other upright elements rather than horizontal work surfaces.

Installation And Substrate Bonding Considerations

This Formica 6435-99 metal laminate uses a phenolic back, which helps the sheet resist creasing when bending around handling carts or leaning panels, so fabrication shops can move panels between cutting, bonding, and trimming stations with reduced surface distortion risk. The phenolic back is also formulated to allow improved adhesion to substrates, which supports consistent bonding behavior when laminating to typical sheet goods used in woodworking environments. With a 0.040 inch, 1.0 mm nominal thickness, the laminate behaves like a conventional p GRADE 85 decorative surface during cutting and routing, so installers can set up tools and jigs using familiar laminate-handling practices. The 48 x 120 inch sheet size supports full-height vertical interior applications where continuous coverage is important for design continuity across large runs.

Applying This DecoMetal Laminate In Real Projects

Where This Formica Metal Laminate Performs Best

This laminate is engineered for vertical interior applications, so it fits projects that call for upright decorative metal surfacing rather than worktops. The 48 x 120 inch sheet size works well when fabricating tall cabinet ends, wall panels, and similar surfaces where uninterrupted height improves the finished look and cuts down on joint layout. Because the face is a polished, anodized, matte, brushed, or mirror aluminum or copper sheet, projects that specify real metal rather than printed patterns gain authentic reflectivity and texture once the laminate is bonded in place. The WOVEN BRASS description ties this surface to the Formica DecoMetal family, so spec-driven jobs that call out this identity can be matched directly to Manufacturer Part M64358599410000.

Details That Support Repeatable Laminate Fabrication

The phenolic back on this Formica Woven Brass metal laminate is designed to prevent creasing, so sheets stay flatter during storage, cutting, and transport between fabrication steps, which supports cleaner bonds to the chosen substrate. That same phenolic back improves adhesion, so once installers apply adhesive and press the sheet to the substrate, the bond is better supported across the full 0.040 inch, 1.0 mm thickness. Working with a Grade 85 laminate gives fabricators a known behavior profile during sawing and routing, which helps maintain consistent edge quality across multiple panels in a run. The combination of real aluminum or copper on the face and a stable phenolic back gives trade users a decorative metal surface that responds predictably under standard laminate shop tooling, which reduces rework and aids in matching multiple components on a project.

Common Questions About Formica 6435-99 Woven Brass

Select Formica 6435-99 Woven Brass For Vertical Work

Formica 6435-99 Woven Brass Metal laminate combines a real aluminum or copper sheet face with a phenolic back that prevents creasing and supports improved adhesion, so it suits trade projects calling for DecoMetal vertical interior applications. The 48 x 120 inch, 0.040 inch (1.0 mm) Grade 85 format gives fabricators a familiar laminate handling profile while delivering a distinctive WOVEN BRASS appearance across full-height panels. For projects that specify this exact Formica identity, choose Manufacturer Part M64358599410000 to align field fabrication with the intended decorative metal surface.