Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PULL, 128MM C/C, BLACK IRON describes a decorative cabinet pull designed for a 128 mm center to center mounting layout, so installers can plan drilling and replacement around a clear hole spacing standard. The product sits in the Handles and Pulls class, giving cabinetmakers a straightforward option when they need a pull instead of a knob on doors or drawers. The 5-1/16 inch measurement noted in the name corresponds closely to the 128 mm center to center spec, which helps during layout when working in either imperial or metric. The pull is part of the Hickory Hardware Forge Series, so it aligns with that design family wherever a consistent visual style is required across a run of cabinetry. The listed black iron finish provides a dark appearance that supports designs needing contrast against lighter cabinet surfaces.
The 128 mm center to center spec on this Hickory Hardware Forge Series pull defines the distance between mounting points, guiding drilling when setting up new cabinet fronts or planning a changeover from another pull with the same spacing. Because the product is identified as a pull in the Handles and Pulls category, it is intended to be grasped across its span, so installers typically align it horizontally on drawers or vertically on doors to match that function. The 5-1/16 inch reference in the name helps translate that span into jobsite tape measurements, so layout on face frames or slab fronts can proceed without converting from metric. The black iron finish description signals a darker surface appearance that can influence where the pull is placed to balance contrast with surrounding materials.
The H076702-BI designation identifies this specific Hickory Hardware Forge Series 5-1/16 inch pull, giving designers and installers a precise part to call out on cabinet schedules. Its role in the Decorative Hardware & Moldings and Handles and Pulls categories indicates it is intended for visible cabinet locations, such as kitchen, bath, or built-in casework fronts where appearance matters along with function. The 128 mm center to center dimension makes this pull suited to doors or drawers laid out around that common drilling pattern, whether on new cabinetry or on projects updating hardware that already uses the same spacing. The black iron description supports applications aiming for a darker decorative accent, so this pull can be positioned where a strong hardware line against lighter finishes helps define the cabinet geometry.
The 128 mm center to center measurement on this Belwith Keeler cabinet pull controls the distance between fastener points, which directly affects drilling, alignment, and how the pull feels when grabbed. Using a defined 128 mm layout keeps hole placement consistent from cabinet to cabinet, supporting straight visual lines across wide banks of drawers. The 5-1/16 inch reference in the name offers a close imperial translation of that same spacing, helping installers who work primarily in inches match shop drawings to the pull selected. Identifying this hardware as part of the Hickory Hardware Forge Series gives project teams confidence that other pulls or knobs from the same series will share a coordinated look, reducing visual mismatch when repeating hardware across a larger installation. The black iron finish description also matters for long runs, because repeating a single dark tone along every front creates a predictable visual rhythm.
The 128 mm center to center size on this pull sets the distance between the two mounting points, guiding drilling and layout so every cabinet front uses the same hole spacing.
The Hickory Hardware Forge Series pull name references 5-1/16 inches, giving an approximate overall length that pairs with the 128 mm center to center mounting dimension for layout planning.
The H076702-BI pull is described as black iron, providing a dark decorative appearance that can create contrast against lighter cabinet surfaces in visible installations.
This 5-1/16 inch cabinet pull is produced under the Hickory Hardware name and is classified under Belwith Keeler handles and pulls, aligning it with that decorative hardware family.
This pull sits in Decorative Hardware & Moldings as a Handles and Pulls item, so it functions as a visible cabinet pull where both appearance and grip matter on doors and drawers.
The H076702-BI part number uniquely identifies this black iron Forge Series pull, allowing drawings and material lists to call out the exact decorative cabinet pull required.
The PULL, 128MM C/C, BLACK IRON designation gives installers and specifiers a clear match between drawing notes and the actual Hickory Hardware Forge Series pull being used. The 128 mm center to center layout and 5-1/16 inch reference in the name simplify planning when a consistent drilling pattern is needed across multiple cabinets. The black iron description ties the visual result to a dark decorative look within the Belwith Keeler handles and pulls family. For projects that call for a defined part number, the H076702-BI identifier lets teams reference this specific decorative cabinet hardware pull when ordering for cabinetry work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BWH076702-BGB Mfr# H076702-BGB | Hickory Hardware Forge Pull 5-1/16" (128 mm) Center to Center, Brushed Golden Brass, H076702-BGB | ||||
Sold in: 1 Each |  BWH076702-CBZ Mfr# H076702-CBZ | Hickory Hardware Forge Pull 5-1/16" (128 mm) Center to Center, Champagne Bronze, H076702-CBZ | ||||
Sold in: 1 Each |  BWH076702-SN Mfr# H076702-SN | Hickory Hardware Forge Pull 5-1/16" (128 mm) Center to Center, Satin Nickel, H076702-SN | ||||
Sold in: 1 Each |  BWH076702-VB Mfr# H076702-VB | Hickory Hardware Forge Pull 5-1/16" (128 mm) Center to Center, Vintage Bronze, H076702-VB |