John Boos butcher block countertop gives you a 25 inch wide by 48 inch long by 1-1/2 inch thick Northern Hard Maple work surface, so you get a solid wood top sized for compact runs, standalone cabinets, or small island sections. John Boos and Company constructs these butcher block tops from high quality Northern Hard Maple hardwood, which provides a dense, stable surface suited for heavy-duty shop or kitchen tasks. The top is kiln dried for low moisture content, helping the block resist seasonal movement in typical interior conditions. Boards are electrostatically glued with moisture resistant adhesive, creating a bonded slab that holds up when exposed to normal spills or routine cleaning. The Varnique finish is a semi-gloss polyurethane finish, so the surface arrives sealed and ready for service without finishing steps. Varnique finish is described as virtually maintenance-free, which reduces ongoing upkeep compared to unfinished tops that need regular treatment.
This butcher block countertop measures 25 inches wide, giving a depth that matches many standard cabinet layouts while still working for narrower runs. The 48 inch length suits short sections, utility bases, or small islands where a full-length run is not needed. With a 1-1/2 inch thick profile, the top presents a substantial edge that aligns well with typical wood countertop builds. The Northern Hard Maple hardwood construction provides a consistent wood species across the full slab, which helps when aligning edges with adjacent maple components. Kiln drying to low moisture content supports dimensional stability during installation in heated or cooled interiors. The Varnique semi-gloss polyurethane finish adds a consistent sheen over the surface, which helps the top visually blend with other sealed wood elements in the same space.
This hard maple butcher block top works well anywhere a 25 inch by 48 inch solid wood surface is needed, such as short base cabinet runs or standalone work tables. The Northern Hard Maple construction provides a dense surface that handles repeated contact with tools, fixtures, or serving ware in shop or kitchen environments. Kiln dried, low moisture content maple helps the top settle into conditioned interior spaces with reduced seasonal movement, which supports cleaner seams where the top meets walls or adjacent surfaces. The 1-1/2 inch thickness offers enough depth for secure mechanical fastening from below, helping installers tie the top into supporting cabinetry or framing. With its butcher block construction, the slab creates a continuous, unified surface that serves as both a work area and a finished countertop.
The use of moisture resistant adhesive in the electrostatically glued joints means the individual maple pieces are bonded into a stable block, which helps the top stay flat under typical interior humidity swings and reduces the likelihood of joint separation. The kiln dried, low moisture content maple core further supports this stability, helping installers maintain alignment along backsplashes or walls without repeated adjustments over time. The Varnique finish is a semi-gloss polyurethane finish described as virtually maintenance-free, so the surface arrives sealed, which removes the separate finishing stage that can delay project timelines. That same Varnique finish also creates a smooth, unified film across the butcher block, helping the top wipe down efficiently between tasks. With a defined 25 inch by 48 inch by 1-1/2 inch size, planners can lay out cabinet or support spacing around a known footprint, which simplifies design, ordering, and on-site fitting.
The countertop measures 25 inches wide, 48 inches long, and 1-1/2 inches thick, giving a compact butcher block slab for short runs or small work areas.
The top is constructed of high quality Northern Hard Maple hardwood, providing a dense, stable surface suitable for butcher block applications and interior worktops.
The butcher block is electrostatically glued using moisture resistant adhesive, producing a bonded slab that supports a flat, unified work surface under normal interior conditions.
The kiln dried, low moisture content maple reduces internal moisture movement, which supports dimensional stability and helps the top stay flatter after installation.
The Varnique finish is a semi-gloss polyurethane finish applied to the butcher block surface, creating a sealed top that is described as virtually maintenance-free in normal service.
This butcher block countertop is manufactured by John Boos and Company, identified by manufacturer part number KCT4825-V for this specific 25 x 48 x 1-1/2 inch maple top.
The John Boos butcher block countertop in Northern Hard Maple, sized at 25 inches by 48 inches by 1-1/2 inches thick, provides a defined footprint for compact workstations or cabinet runs. Its kiln dried, low moisture content core and moisture resistant glued construction support long-term stability once installed indoors. The Varnique semi-gloss polyurethane finish arrives as a sealed, virtually maintenance-free surface, helping projects move from installation to everyday use without additional finishing stages. For layouts built around a solid maple butcher block work surface, this KCT4825-V top offers a straightforward way to specify an exact size and finish combination.