Olympus Disc Tumbler Cam Lock For Drawers And Doors

Olympus disc tumbler cam lock gives drawers and cabinet doors a keyed lock point using a 1-3/16 inch cylinder, so casework can be secured where a compact cam lock is preferred over larger lock bodies. The lock comes assembled with the cylinder and body joined by a patented retainer staple, which speeds bench work because the core does not have to be built up in the shop. The product is keyed different, so each lock operates on its own key, which suits installations where individual locked compartments are needed. A 90 degree cam turn operates the locking cam with a quarter-turn motion, giving a quick, repeatable action for opening and closing. The matte black US19 finish provides a dark, uniform appearance that blends with black decorative hardware and modern cabinet fronts.

Cam Lock Details That Support Daily Use

• The lock comes assembled with cylinder and body connected by a patented retainer staple, which reduces assembly steps during installation and helps maintain correct cylinder alignment as the lock is mounted into the panel.
• Passing the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal shows the lock is built for repeated everyday operation, which matters on frequently accessed drawers or cabinet doors.
• The eyelet spur washer engages the mounting surface when screwed into place, preventing lock rotation and helping the fixing nut stay tight so the cylinder position remains stable in service.
• The keyed different setup assigns a unique key to each 1-3/16 inch cylinder, which is useful where separate users or cabinet bays need their own lock control without shared keying.
• The revolutionary cylinder plus cylinder extender design allows cylinders to be swapped between different size cam lock bodies, which can simplify stocking of lock parts and support keying flexibility across various cabinet runs.

Cam Lock Mounting And Door Construction Fit

The Olympus cam lock supports a maximum material build-up of 7/8 inch, which defines the usable panel and frame thickness for mounting the 1-3/16 inch cylinder in a cabinet or drawer front. For lipped or overlay construction, the lock works with a 1-1/2 inch straight cam, matching common overlay door layouts where the cam must reach behind a face frame. For flush construction, the lock uses a 1-1/8 inch extension cam with 11/32 inch offset, so the cam can clear the edge of flush doors or drawer fronts while still engaging a strike point. On overlay applications, the combined thickness of the front and frame cannot exceed the listed cylinder length, which keeps the cylinder tailpiece and cam within the effective engagement zone behind the front.

Using This Olympus Cam Lock In Cabinet Work

Where This Cam Lock Fits In Cabinets

This Olympus disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so the same lock family can be used across multiple cabinet openings on a project. The 90 degree cam turn motion works with both orientations, which simplifies layout when switching between hinged doors and sliding drawers in the same run. Lipped or overlay constructions can use the 1-1/2 inch straight cam to reach behind door edges, giving a positive stop against a frame or strike bar. Flush constructions can use the 1-1/8 inch extension cam with 11/32 inch offset, positioning the cam so it swings cleanly behind a flush front without binding against the edge. The ANSI/BHMA Grade 2 cycle rating at 20,000 cycles supports cabinets that see regular traffic in workrooms, storage areas, and similar environments where repeated key use is expected.

Details That Support Consistent Locking Results

The patented retainer staple holding the cylinder and body together keeps the lock assembly consistent from unit to unit, so boring patterns set for the 1-3/16 inch cylinder can be reused across the job with predictable results. The eyelet spur washer, once screwed into the panel, bites into the substrate to resist rotation, which helps the cam stay aligned with strikes and keeps the fixing nut from backing off over time. The cylinder plus cylinder extender arrangement allows cylinders to be exchanged between different size cam lock bodies, supporting projects where one keying system is used across cabinets of different thicknesses. Keyed different cylinders help organize storage by assigning a unique key to each lock, which is useful when individual users are responsible for specific drawers or doors. The matte black US19 finish presents a low-reflective appearance that coordinates with dark pulls and hinges, so the lock body visually blends into contemporary casework.

Common Questions About This Olympus Cam Lock

Selecting This Cam Lock For Your Next Cabinet Run

The Olympus disc tumbler cam lock with 1-3/16 inch cylinder length, keyed different setup, and matte black US19 finish offers a specific combination of function and appearance for drawers and doors. Support for lipped or overlay construction with a 1-1/2 inch straight cam and flush construction with a 1-1/8 inch extension cam with 11/32 inch offset lets this lock family cover multiple cabinet layouts. The lock comes assembled, uses a patented retainer staple, and has an ANSI/BHMA Grade 2 cycle rating at 20,000 cycles, giving a clear picture of how it fits into daily casework use. Use this part number when that feature set aligns with your cabinet thickness and construction style.