Olympus Disc Tumbler Cam Lock For Drawers And Doors
Olympus disc tumbler cam lock gives you a keyed locking point for drawers and right-hand or left-hand doors, so one part number can cover multiple cabinet layouts on a job. The 1-3/16 inch cylinder keyed alike C415A keeps keying consistent across installations, which simplifies key management when you are securing a bank of cabinets. The matte black 953-US19 finish presents a dark, uniform look that matches modern black hardware runs across millwork. The lock comes assembled with the cylinder and body connected by a patented retainer staple, so the working components arrive already mated for straightforward mounting into the panel. The cylinder plus cylinder extender design lets cylinders be swapped between different size cam lock bodies, which supports inventory flexibility when you need different reaches while holding the same key system. The ANSI/BHMA Grade 2 cycle test rating of 20,000 cycles including key insertion and removal shows it is engineered for repeated daily operation in typical cabinet environments.
Key Olympus Cam Lock Details That Support Your Work
- The cylinder plus cylinder extender allows cylinders to be easily swapped between different size cam lock bodies, so one keyed system can serve various door and drawer thicknesses in a project.
- The lock comes assembled with the cylinder and body connected via a patented retainer staple, which saves assembly time at installation and keeps the relationship between parts consistent from piece to piece.
- The matte black 953-US19 finish delivers a uniform dark appearance that coordinates with black cabinet pulls and hinges, keeping visible hardware consistent across the run.
- The disc tumbler design is keyed alike C415A, letting multiple locks share the same key code so users can operate several cabinets without carrying additional keys.
- Passing the ANSI/BHMA Grade 2 cycle test for 20,000 cycles including key insertion and removal indicates the mechanism is built for regular use in active storage areas.
- Custom keying typically ships direct from the manufacturer in 48-72 hours, which supports project schedules when a specific keying arrangement is required.
Installation And Construction Details For This Cam Lock
This Olympus cam lock uses a 90 degree cam turn, so the cam motion is predictable when you clock it against a strike or frame member. It is designed for drawers plus right-hand or left-hand doors, allowing the same lock family across varying cabinet configurations. For lipped or overlay construction it uses a 1-1/2 inch straight cam, giving extended reach across the overlay to the frame. For flush construction it uses a 1-1/8 inch extension, 11/32 inch offset cam to match the plane of a flush door or drawer front. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length listed for this model, which keeps the cylinder tail properly engaged with the cam. The eyelet spur washer is meant to be screwed into place so the spur washer prevents lock rotation and holds the fixing nut position during use.
Where This Olympus Cam Lock Fits And How It Performs
Using The Cam Lock In Drawers And Cabinet Doors
This disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so it can be laid out across a full cabinet elevation without changing lock types between compartments. In lipped or overlay construction, the 1-1/2 inch straight cam reaches past the lip to engage the cabinet frame, providing a positive catch point behind the front. In flush construction, the 1-1/8 inch extension, 11/32 inch offset cam is shaped to pick up a strike or frame that sits behind a flush panel, so the movement of the 90 degree cam turn translates cleanly into locked and unlocked positions. The cylinder plus cylinder extender system allows the same cylinder design to operate in different bodies, supporting situations where some locations need deeper or shallower mounting while staying on a common key code. Because the lock is keyed alike C415A, multiple drawer and door locations can share the same key, which simplifies day-to-day access when installed in office, residential, or shop cabinetry.
Details That Support Alignment, Longevity, And Workflow
The lock comes assembled with the cylinder and body connected by a patented retainer staple, so the relationship between the keyway and cam orientation is preserved from the factory setting, supporting consistent alignment across repeated installs. The spur washer with eyelet is designed so that when it is screwed into place, the spur washer prevents lock rotation and keeps the fixing nut from loosening after installation, which helps maintain cam alignment over time. The 90 degree cam turn creates a clear stop-to-stop motion, which is straightforward to align with a strike location during layout. Passing the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal indicates that the lock mechanism is built to handle repeated locking and unlocking under regular cabinet use. The matte black 953-US19 finish keeps the visible collar and keyway area visually consistent with other black hardware, supporting a coordinated appearance when hardware is exposed on finished millwork. Custom keying typically shipping direct from the manufacturer in 48-72 hours supports project planning when a particular keying system or master key arrangement is needed for the installation.
Common Questions About The Olympus Disc Tumbler Cam Lock
What cylinder size and keying does this Olympus cam lock use?
The Olympus disc tumbler cam lock uses a 1-3/16 inch cylinder keyed alike C415A, giving a consistent key code across locks specified with this keying for coordinated access.
How does the 90 degree cam turn affect cabinet layout?
The 90 degree cam turn provides a quarter-turn motion between locked and unlocked, making it straightforward to clock the cam against a strike or frame during cabinet layout.
Can this Olympus cam lock be used on both overlay and flush fronts?
The Olympus cam lock is specified for lipped or overlay construction with a 1-1/2 inch straight cam and for flush construction with a 1-1/8 inch extension, 11/32 inch offset cam.
What does the ANSI BHMA Grade 2 20,000 cycle test mean in practice?
The Olympus disc tumbler cam lock has passed the ANSI/BHMA Grade 2 cycle test of 20,000 cycles including key insertion and removal, indicating suitability for repeated cabinet use.
How does the spur washer help after installation?
The spur washer with eyelet is designed to be screwed into place so the spur washer prevents lock rotation and keeps the fixing nut from loosening over time.
What is the benefit of the cylinder plus cylinder extender design?
The cylinder plus cylinder extender design lets cylinders be easily swapped between different size cam lock bodies, supporting varied cabinet thicknesses using a common cylinder type.
Select This Cam Lock For Coordinated Cabinet Security
The Olympus disc tumbler cam lock with 1-3/16 inch cylinder keyed alike C415A gives a consistent locking solution for drawers and for right-hand or left-hand doors on the same project. The matte black 953-US19 finish aligns with modern black hardware, keeping visible components coordinated. The cylinder plus cylinder extender system and the choice of straight or offset cams support different construction styles while staying on the same lock family. With ANSI/BHMA Grade 2 cycle test performance and a 90 degree cam turn, this cam lock is suited for cabinet installations that need predictable operation and unified keying. Order this Olympus 953-US19-C415A cam lock when the project calls for keyed alike control across multiple cabinet openings.
