Olympus Disc Tumbler Cam Lock, 1-7/16" Cylinder Keyed Alike 390 Matte Black 955-US19-C390A

Olympus Disc Tumbler Cam Lock For Cabinets

Olympus disc tumbler cam lock gives drawers and cabinet doors a keyed control point using a cam-driven locking action, so you can secure storage while keeping operation simple for daily use. The 1-7/16 inch cylinder keyed alike to 390 streamlines key management across multiple locks, which matters when you want one key to operate several cabinets in a shop, office, or commercial layout. The matte black 955-US19 finish establishes a clean, modern look on dark casework, so the lock blends into contemporary cabinet hardware setups. This lock is classified under cam locks for locks and latches, so it suits typical cabinet and furniture applications. The product from Olympus Lock, Inc. uses a disc tumbler mechanism, which supports controlled keying setups in projects that call for keyed alike systems.

Cam Lock Details That Support Daily Use

• The lock comes assembled, so installers can place it into the prepared cutout and secure it without handling loose internal components, which reduces assembly steps during cabinet production runs.
• The design passed the ANSI/BHMA Grade 2 cycle test with 20,000 cycles including key insertion and removal, demonstrating that the cam and cylinder interface is built for repeated operation in everyday traffic areas.
• The lock is shipped with the cylinder and body assembled via the patented retainer staple, which holds these parts together during handling so the unit stays in one piece while positioning it in the cabinet panel.
• The spur washer with eyelet, when screwed into place, prevents lock rotation and keeps the fixing nut from loosening after installation, so the lock position stays aligned with the strike surface over time.
• The revolutionary cylinder and cylinder extender arrangement allows cylinders to be swapped between different size cam lock bodies, so shops can adapt cylinder lengths while maintaining the same keying system across varying door or drawer thicknesses.

Installation Fit For Overlay And Flush Cabinet Work

The 90 degree cam turn gives a quarter-turn locking action, so the cam rotates from open to locked in a simple motion that pairs well with standard cabinet ergonomics. For drawers and right-hand or left-hand doors, the lock provides flexible orientation, so it can be used across a run of mixed cabinet types without changing hardware families. For lipped or overlay construction, the lock works with a 1-1/2 inch straight cam, which lets the cam reach behind the lip or overlay to capture the frame edge. For flush construction, the lock is matched with a 1-1/8 inch extension and 11/32 inch offset cam, so the offset brings the cam into the correct plane for a flush door or drawer front.

Using This Cam Lock In Real Cabinet Projects

Where This Olympus Cam Lock Performs Best

This Olympus disc tumbler cam lock is designated for drawers and right-hand or left-hand doors, so it fits typical cabinet layouts in woodworking, office, and storage builds. The cam options support lipped or overlay fronts using the 1-1/2 inch straight cam, allowing the cam to travel past the overlay and grab the cabinet frame for secure closure. For flush fronts, the 1-1/8 inch extension with 11/32 inch offset cam positions the locking surface correctly behind the panel, which helps achieve consistent engagement on flush casework without reworking door thickness. The combined thickness of the front and frame for overlay applications cannot exceed the cylinder length listed, so the lock body seats properly and the key can fully engage the cylinder. The matte black finish aligns visually with dark hinges and pulls, so the lock can be integrated into coordinated hardware schedules across a project.

Details That Help Achieve Repeatable Locking Results

The keyed alike 390 configuration keeps multiple Olympus disc tumbler cam locks operating on the same key, which reduces key counts and simplifies access control for facilities or millwork packages using several locks. The ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal shows that the keyway and cam interface are designed to tolerate frequent locking and unlocking, which is important for cabinets in regular daily service. The spur washer with eyelet, when screwed into place, holds the lock against rotation and keeps the fixing nut from loosening, so the key position remains upright and the cam meets the strike point consistently over the life of the cabinet. The patented retainer staple that assembles cylinder and body keeps those components together as a unit, which maintains cylinder depth alignment relative to the cam position. The cylinder and cylinder extender design lets cylinders be swapped between different size cam lock bodies, so shops can respond to varying panel thicknesses while maintaining existing keying schemes. Custom keying typically ships direct from the manufacturer in 48-72 hours, which supports project schedules when a specific key system is required.

Common Questions About Olympus Disc Tumbler Cam Lock

Selecting This Cam Lock For Your Next Build

The Olympus disc tumbler cam lock combines a 1-7/16 inch keyed alike 390 cylinder, ANSI/BHMA Grade 2 tested performance, and matte black 955-US19 finish, so it suits cabinet projects that demand coordinated appearance and repeated daily use. With cams for both lipped or overlay construction and flush construction, plus a 90 degree cam turn, it adapts to varied drawer and door layouts while keeping operation straightforward for end users. Order this Olympus cam lock when your project calls for keyed alike control across multiple drawers and cabinet doors.