Olympus Disc Tumbler Cam Lock, 1-3/4" Cylinder Keyed Different/Master Keyed, Matte Black 960-US19-MKKD

Olympus Disc Tumbler Cam Lock For Drawers And Doors

Olympus disc tumbler cam lock gives you a keyed cam solution for drawers and doors using a disc tumbler cylinder. The lock is matte black, so the face presents a dark, low-visibility look on modern casework where hardware should stay visually quiet. The cylinder is keyed different and master keyed, which separates day-to-day keys while still allowing a master key to operate the same cylinders in controlled environments. The lock is shipped with the cylinder and body assembled via a patented retainer staple, so the core and housing arrive as a single unit that drops into your prep without on-site cylinder fitting. The lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles, including key insertion and removal, which shows that the internal mechanism is built to handle repeated daily locking and unlocking in typical commercial use.

Key Details That Support Reliable Cam Lock Jobs

• The cylinder and body are assembled via a patented retainer staple, which locks the pieces together so the cam lock installs as one component and avoids handling loose cores during shop or field work.
• The lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, which means the keyway and cam action are designed to tolerate frequent operation where doors and drawers see regular access.
• The cylinder is keyed different and master keyed, so each locking point can have its own key while still operating under a master key system to simplify key control across multiple cabinets or stations.
• The cam turns 90 degrees, giving a quarter-turn action that is easy to repeat on site and matches standard cam lock motion for typical drawer and door strikes.
• The design uses a spur washer with an eyelet that, when screwed into place, prevents the lock body from rotating and helps keep the fixing nut from loosening over time under door and drawer use.

Cam Lock Fit, Cylinder Length, And Door Construction

The Olympus disc tumbler cam lock is described with a 1-7/16 maximum dimension in the SAP description, tying the body to installations where the lock body depth cannot exceed that measurement. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length listed for the lock, so the cylinder projects past the material stack-up for full cam engagement. The lock supports lipped or overlay construction using a 1-1/2 inch straight cam, and it supports flush construction using a 1-1/8 inch extension cam with an 11/32 inch offset. These specific cam options let the same body serve different cabinet styles so shops can match the throw to their door build without changing the basic cylinder.

Using This Matte Black Cam Lock In Real Projects

Where This Olympus Cam Lock Is Applied

This Olympus disc tumbler cam lock is intended for drawers and for right-hand or left-hand doors, so a single part number can be used around a cabinet run without tracking hand-specific bodies. The matte black finish on the visible face suits applications where dark hardware is preferred on casework, such as contemporary cabinetry or fixtures that use dark pulls and hinges. The lock supports lipped and overlay construction with a 1-1/2 inch straight cam, so it can secure an overlay door by swinging the straight cam behind the frame. It also supports flush construction with a 1-1/8 inch extension cam that has an 11/32 inch offset, so the cam can reach and hook behind a flush jamb or strike position on casework with a flat front. The 90 degree cam turn keeps the operating motion consistent across these applications, which helps installers and users recognize the locked and unlocked positions at a glance.

Details That Support Repeatable Locking Results

The lock body and cylinder are assembled via a patented retainer staple, so the cylinder is already retained in the housing when you receive it and the cam lock drops into a properly sized bore as a unified piece. This saves handling separate cores and reduces the chance of mismatching cylinders and bodies during bench assembly. The spur washer with eyelet is designed to be screwed into place so it bites into the substrate, which resists lock-body rotation and helps keep the fixing nut from backing off after repeated door or drawer movement. The cylinder is keyed different and master keyed, so installers can set up individual user keys that match each cam lock while a master key operates them all, streamlining access control on multi-cabinet runs. The lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles, including key insertion and removal, showing that the keyway and turning mechanism are built to withstand many locking cycles in service. A 90 degree cam turn keeps the throw predictable, so aligning strikes and cams during layout is straightforward across a job with many identical lock positions.

Common Questions About Olympus Disc Tumbler Cam Lock

Select This Cam Lock For Drawer And Door Security

This Olympus disc tumbler cam lock from Wurth Baer Supply combines a keyed different and master keyed cylinder with a matte black finish for controlled access on dark casework. The body and cylinder are assembled via a patented retainer staple, which brings the lock to the bench or jobsite ready to install as a single unit. The 90 degree cam turn, plus options for straight and offset cams, lets the same lock body serve drawers, lipped or overlay doors, and flush doors. The lock has passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles, so it is suited to projects where doors and drawers are opened and locked frequently.