Olympus Disc Tumbler Cam Lock For Drawers And Doors
Olympus disc tumbler cam lock gives drawers and cabinet doors a keyed control point using a disc tumbler mechanism, so casework can be secured with a compact, familiar lock format installers already know how to use. The lock body and cylinder are assembled via a patented retainer staple, which holds the cylinder firmly in the housing and supports consistent operation under repeated use. The product passes the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, so it is designed to stay functional through regular locking and unlocking in busy environments. A matte black 960-US19 finish supplies a dark, uniform look that blends into modern casework where visible hardware needs to remain discreet. The design is keyed alike 346, which allows multiple locks keyed to the same code for straightforward key control across a bank of cabinets.
Key Cam Lock Details That Support Daily Use
- The lock is shipped with cylinder and body assembled via a patented retainer staple, which saves bench time during installation and reduces handling of small lock components on site.
- A spur washer with eyelet is part of the assembly; when the spur washer is screwed into place it prevents lock rotation, which keeps the fixing nut from loosening after the cabinet is put into service.
- The cylinder and cylinder extender are designed as a revolutionary system that allows cylinders to be swapped between different size cam lock bodies, giving shops flexibility to standardize keying while using various body lengths.
- The cam turns 90 degrees, providing a short, predictable handle throw that works well in tight cabinetry where full-rotation hardware would interfere with adjacent components.
- The cam lock is suitable for drawers and for right-hand or left-hand doors, so a single locking solution can be used across different cabinet layouts without changing part families.
Installation And Construction Fit Details
The cam lock supports lipped or overlay construction using the 1-1/2 inch straight cam, so face-frame or overlay cabinet fronts can be secured without special brackets. For flush construction it uses a 1-1/8 inch extension cam with an 11/32 inch offset, which positions the cam properly behind flush doors or drawer fronts where the locking bar needs to reach a frame or strike. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length listed, so the lock seats correctly and the cam clears the cabinet interior. The lock design allows the key to be removable in both locked and unlocked positions, which lets users leave the cylinder open or secured without leaving the key hanging in the lock.
Using This Olympus Cam Lock In Cabinet Projects
Where The Olympus Disc Tumbler Cam Lock Fits
This cam lock is designed for drawers and cabinet doors, so it covers common storage points in casework such as file drawers, supply cabinets, and small compartment doors. It works on right-hand and left-hand doors, which lets installers use the same part when the swing direction changes across a run of cabinets. In lipped or overlay construction, the 1-1/2 inch straight cam reaches behind the overlay front to engage a frame or strike surface, so the door or drawer can pull tightly against the stop when locked. In flush construction, the 1-1/8 inch extension with 11/32 inch offset positions the cam at the correct depth behind a flush front, helping the lock bar land squarely on the cabinet frame. For overlay applications, limiting the combined front and frame thickness to the cylinder length keeps the threaded portion accessible and allows the cam to rotate freely without binding.
Why Olympus Design Details Improve Workflow And Consistency
The patented retainer staple that holds the cylinder and body together simplifies shop staging, because the lock arrives as a single assembled unit ready to fit into the prepared hole. The ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal supports consistent operation in applications where staff lock and unlock cabinets many times over the life of the installation. The spur washer with eyelet, once screwed into position, prevents the lock from rotating in the panel, which helps the cam maintain its alignment to strikes or frames over time. The cylinder and cylinder extender system lets cylinders move between different size cam lock bodies, so a project can use varied body lengths while keeping to a common keyed alike 346 code. Key removal in both locked and unlocked positions lets users open a cabinet, remove the key, and leave it accessible, or lock it and remove the key again for controlled access.
Common Olympus Disc Tumbler Cam Lock Questions
What type of mechanism does this Olympus cam lock use?
The Olympus disc tumbler cam lock uses a disc tumbler mechanism, which provides a familiar key operation for drawers and cabinet doors across typical casework installations.
How far does the cam rotate on this lock?
The Olympus disc tumbler cam lock uses a 90 degree cam turn, giving a short, positive throw that suits compact cabinetry where only a quarter-turn handle motion is practical.
Can this cam lock be used on both drawers and doors?
The Olympus disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so one lock style can handle multiple cabinet access points.
How does the keyed alike 346 setup help on a project?
The Olympus disc tumbler cam lock is keyed alike 346, so multiple locks share the same key code, simplifying key management across groups of cabinets.
What does the ANSI/BHMA Grade 2 cycle test mean here?
The Olympus disc tumbler cam lock passes ANSI/BHMA Grade 2 at 20,000 cycles including key insertion and removal, indicating it is built for repeated everyday locking use.
When is the offset cam used on this lock body?
The Olympus disc tumbler cam lock uses the 1-1/8 inch extension, 11/32 inch offset cam for flush construction, positioning the cam to catch the cabinet frame behind a flush front.
Selecting This Cam Lock For Your Next Install
The Olympus disc tumbler cam lock in matte black 960-US19-C346A brings a keyed alike 346 locking point to drawers and right-hand or left-hand doors, so you can standardize security across a run of cabinets. Its ANSI/BHMA Grade 2 20,000-cycle performance, 90 degree cam turn, and key removable in both locked and unlocked positions provide a practical balance of durability and daily convenience. Lipped or overlay construction with the 1-1/2 inch straight cam and flush construction with the 1-1/8 inch extension, 11/32 inch offset cam give you options for different cabinet builds using one lock family. Use this Olympus cam lock when you need coordinated keying with a stable cam action in modern casework.
