Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3-19/64" Disc Tumbler Straight Cam from Olympus Lock, Inc. is a straight cam designed for disc tumbler locks, so it serves as the working arm that turns to secure or release doors, drawers, or panels in your hardware layouts. The stated 3-19/64 inch size identifies the cam length, which helps match this part to disc tumbler lock bodies that are built around similar reach requirements in cabinetry or casework. As a disc tumbler cam in the Lock Accessories category, it works as a dedicated component for lock function rather than a general-purpose bracket, supporting consistent motion every time the lock cylinder is rotated. The Straight Cam name means the cam profile is flat rather than offset, which matters when the lock must pull directly against a strike or frame without stepped geometry.
This straight cam is described as a Disc Tumbler cam, so it is shaped to mount on compatible disc tumbler lock cores and swing through an arc that actually performs the locking. The straight geometry means the working edge travels in a simple radial path, which is useful when the lock needs to engage a strike or frame at a predictable distance from the cylinder centerline. At 3-19/64 inches, the cam length supports layouts where the lock body is set back from the strike point and must bridge that gap when turned. As a Lock Accessories component, it is intended to integrate into lock assemblies rather than act as general hardware, which keeps the focus on accurate fit within the locking system.
The 3-19/64" Disc Tumbler Straight Cam sits in the Locks and Latches category as a lock accessory, so it is aimed at installations where a disc tumbler cylinder already exists and needs a matching cam to complete the mechanism. As a Disc Tumbler Cam from Olympus Lock, Inc., it aligns with disc tumbler lock bodies often found in cabinetry, casework, and similar woodworking-focused projects supplied by distributors such as Wurth Baer Supply, which concentrates on serving the woodworking industry. The 3-19/64 inch sizing gives it reach suited to layouts where the lock barrel is set inside a panel and must still contact a frame or keeper point. Because the cam is specifically identified as straight, it fits situations where the lock is positioned so a simple linear swing of the cam will catch a strike or edge without needing an offset bend. The manufacturer part number P95-CM-3 gives installers and purchasing teams a precise identifier when matching this cam to design documents, service notes, or replacement schedules.
The straight cam geometry described in the Web and SAP descriptions means the working face does not step in or out relative to the mounting plane, which helps produce a repeatable lock and unlock motion once the lock centerline and strike position are set. As a Disc Tumbler Cam, it is meant to be driven directly by a disc tumbler cylinder, so rotation of the key translates into a controlled sweep of the cam for predictable engagement. The 3-19/64 inch length gives a defined radius from the cylinder center, which helps maintain consistent contact with a frame or keeper point across multiple units built to the same layout. Being part of the Lock Accessories family, this cam plays a focused role in the overall assembly, simplifying replacement decisions because the same style and length can be specified whenever that motion and reach are required. The Olympus Lock, Inc. association ties this cam to an established locking product line, supporting consistent interface dimensions between the cam and matching disc tumbler components on repeat projects.
The 3-19/64" Disc Tumbler Straight Cam is identified as a Disc Tumbler Cam, so it is intended to operate as the moving arm on disc tumbler style lock mechanisms.
The Olympus Lock, Inc. P95-CM-3 cam is described as 3-19/64 inches long, providing a specific reach from the lock center to engage a frame, strike, or cabinet edge.
The product is described as a Straight Cam in both the Web and SAP descriptions, meaning its working section follows a straight profile rather than an offset or cranked shape.
This part is classified under Locks and Latches as a Lock Accessories item and further defined as a Disc Tumbler Cam, so it serves as a component within a larger lock assembly.
The 3-19/64" Disc Tumbler Straight Cam is manufactured by Olympus Lock, Inc., as indicated by the brand information and the manufacturer part number P95-CM-3.
The part number P95-CM-3 is the manufacturer part number for this Straight Cam, Disc Tumbler, 3IN, giving a precise identifier for specifying or reordering the same cam.
The 3-19/64" Disc Tumbler Straight Cam from Olympus Lock, Inc. provides a defined straight cam option for disc tumbler style locks where a 3-19/64 inch reach is required. As a Disc Tumbler Cam in the Locks and Latches | Lock Accessories category, it is suited to projects that rely on dedicated lock components rather than improvised hardware. When a design or replacement task specifies the P95-CM-3 identifier or calls for a straight disc tumbler cam around 3 inches in length, this part matches that description and supports consistent locking performance across similar installations.
Sold In: 1 Each