Plastic upper guide for 3/4 inch door describes this EPCO sliding door hardware component that supports by-passing wood doors at the top of the opening, so the door edges track in line instead of wandering during use. The guide is sized for 3/4 inch by-passing wood doors, so it matches a common door thickness and helps keep paired doors aligned as they slide past each other. High impact, extruded polystyrene construction provides a rigid plastic body that resists impact during regular door movement, supporting long-term function in a busy opening. The 12 ft long profile lets installers span wider openings or cut multiple shorter guides from a single length, which helps reduce waste on multi-door runs. A 1.938 inch wide section gives a consistent bearing surface along the top of the doors, helping the door edges stay captured in the guide during travel.
This EPCO plastic upper guide works with 3/4 inch by-passing wood doors, so door builders and installers can plan clearances and edge details around that thickness for a consistent sliding action. The profile is specified for use with Plastic Track 234, 801, 802 or Kerf Track 810 track, so it is intended to pair with those matching upper track designs in a coordinated sliding system. Because the profile is 12 ft long, it can be laid out across the full width of a multi-door opening and cut to length where needed, which helps align the guide with the track and door layout. The 1.938 inch width provides enough surface to work in combination with the referenced tracks, supporting stable guidance along the door top.
This EPCO sliding door hardware component is specified for 3/4 inch by-passing wood doors, so it fits typical interior bypass door applications where two wood doors slide past each other in front of a closet or cabinet opening. The web description identifies it as a plastic upper guide, so it serves at the top of the opening rather than at the floor, keeping the upper edges of the doors captured while they move. Because it is for use with Plastic Track 234, 801, 802 or Kerf Track 810 track, it works as part of a coordinated system where the upper track and guide are designed to interact, helping the door tops follow a defined path. The 12 ft long brown profile allows installers to match longer closet spans or workshop storage openings and trim the guide to suit each specific width. A 1.938 inch wide profile gives a substantial guiding area across the top edges of the doors, supporting consistent lateral control when the doors are pushed from either side.
The high impact, extruded polystyrene construction means the upper guide is formed from a rigid plastic that resists impact, so contact with the door edges during opening and closing is handled without deforming the guide shape. This material choice supports ongoing door alignment because the guide is designed to retain its profile under repeated use. Being specified for 3/4 inch by-passing wood doors, the guide geometry matches that door thickness, which helps prevent excessive side play when the doors are moved along the tracks. Pairing the guide with Plastic Track 234, 801, 802 or Kerf Track 810 track lets installers build a sliding run where the track and guide are engineered together, which supports smoother tracking along the entire 12 ft span. The 1.938 inch width increases the contact surface at the top, which helps distribute door loading along the guide and supports consistent door behavior across multiple door panels in a project.
This EPCO plastic upper guide is designed for 3/4 inch by-passing wood doors, so it suits installations where two wood doors slide past each other on a shared opening.
The plastic upper guide for 3/4 inch door is 12 ft long, allowing coverage of wide openings or cutting into shorter sections for multiple sliding door runs.
This EPCO sliding door upper guide is for use with Plastic Track 234, 801, 802 or Kerf Track 810 track, so it is intended to coordinate with those specific track profiles.
The 12 ft plastic upper door guide is made from high impact, extruded polystyrene, providing a rigid plastic profile that handles repeated door movement contact.
This high impact extruded polystyrene guide is 1.938 inches wide, giving a broad bearing surface along the top of the door edges during sliding.
The brown upper guide is identified by manufacturer part number 2234-BR, which supports accurate reordering for matching sliding door installations.
The EPCO plastic upper guide for 3/4 inch door combines a 12 ft long, 1.938 inch wide profile with high impact, extruded polystyrene material, so it supports stable tracking for by-passing wood doors across wider openings. Its design for 3/4 inch by-passing wood doors, along with intended use with Plastic Track 234, 801, 802 or Kerf Track 810 track, makes it suited to coordinated sliding door hardware layouts where consistent alignment is important. Using the 2234-BR part number, installers can match this brown upper guide across multiple openings that share the same sliding system design.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  EPC234BR Mfr# 234-BR | Plastic Track Guide for 3/4" Door Brown, 12'L | ||||
Sold in: 1 Each |  EP801-6 Mfr# 801-6 | 6' Single Channel Fiber Track for Lightweight Door, Black | ||||
Sold in: 1 Roll |  EP810 Mfr# 810 | Single Channel Tracks Plastic Kerf Tracks and Glides for Lightweight Doors, 100' |