EPCO Strike Plate, Nickel-Plated

EPCO Strike Plate For Glass Touch Latch Use

EPCO strike plate is a nickel-plated strike plate designed for 1/4 in and 3/16 in glass, so it matches common glass door thicknesses on cabinets and showcases. The strike plate works with EPCO 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches, creating a defined catch point so the latch can hold the glass door closed and release it on push. Because the strike is matched to these specific touch latch models, the geometry between the latch and the glass contact point is predictable on repeat installs. The nickel-plated finish on the strike plate provides a hard metal surface at the impact point, helping the latch nose engage cleanly against the glass-mounted part over time. This EPCO strike plate is classified under lock accessories and strikes, so it fits naturally into lock and latch layouts on glass cabinetry where a touch-operated catch is preferred.

Key EPCO Strike Plate Details For Glass Work

• The strike plate is designed for 1/4 in glass, so it fits one standard glass thickness used on many cabinet doors and panels, helping align the touch latch contact point without extra shimming.
• The strike plate is also designed for 3/16 in glass, covering another common thin glass dimension so the same part can be applied across different light glass door runs in a project.
• The nickel-plated finish on the strike plate creates a durable metal contact face for EPCO touch latches, which supports consistent push-to-open and close action on glass over repeated use.
• The strike plate is specified for use with EPCO 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches, so the part number can be matched directly when laying out or servicing those latch models.
• The EPCO strike plate is categorized as a lock accessory in the strikes class, so it integrates into latch and lock planning on glass cabinets where a defined meeting point for the latch is required.

Strike Plate Fitment On 1/4 In And 3/16 In Glass

The EPCO strike plate is specifically described as a strike plate for 1/4 in and 3/16 in glass, so its geometry is intended to align on those glass thicknesses without improvising parts. Because the same strike can be used on both 1/4 in and 3/16 in glass, it supports projects that mix these glass sizes while keeping the latch-strike interface consistent across doors. When paired with compatible EPCO touch latches, the strike plate establishes the meeting surface on the glass panel so the push latch can positively engage. This dimensional match between glass thickness and strike plate design helps maintain a reliable closing point and release point for the EPCO touch latch system on glass installations.

How This EPCO Strike Plate Supports Glass Latches

Using The Strike Plate On Glass Cabinet Doors

This EPCO strike plate, identified as part 509-PC, is described as a strike plate for 1/4 in and 3/16 in glass, which ties it directly to thin glass cabinet and showcase doors built in those sizes. In practice, this lets the same part serve on typical glass front cabinets that may use either 1/4 in or 3/16 in door panels. Because the strike plate is nickel-plated, the metal surface provides a consistent meeting point for the touch latch mechanism when the glass door closes. The product is categorized within locks and latches under lock accessories and strikes, so it functions as the receiving part of a latch system on glass. For glass doors built around EPCO 507, 508, 512, 513, 514-BL-PWS or 515-BL-PWS touch latches, this strike plate is designated for use with those latch models, which allows the latch layout to be coordinated to a known, matched strike.

Why Matching EPCO Touch Latches Matters In Use

The Web description states that this strike plate is for use with EPCO 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches, tying the 509-PC strike directly to those mechanisms. That stated pairing means the travel and nose design of those EPCO touch latches are intended to interact with this specific strike profile on glass, helping achieve predictable push-to-open and hold-closed behavior. Because the strike plate is designed around 1/4 in and 3/16 in glass, it positions the contact area where those EPCO latch models expect to meet the door, reducing trial-and-error alignment on those thicknesses. The nickel-plated finish gives the latch a hard, defined contact surface rather than bearing directly on glass, which supports smoother actuation where the glass door repeatedly meets the metal strike during everyday opening and closing.

Common Buyer Questions About EPCO Glass Strike Plate

Select The EPCO Strike Plate For Matched Glass Latches

The EPCO strike plate for 1/4 in and 3/16 in glass gives a defined contact point for EPCO 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches on glass cabinetry. By using the 509-PC nickel-plated strike plate where those latch models are specified, the latch nose and strike surface are matched to the stated glass thicknesses, supporting consistent engagement on cabinet or showcase doors. For projects built around EPCO touch latches on thin glass panels, selecting this EPCO strike plate aligns the strike detail with the latch family and glass dimensions already in the layout.