Magnetic Catch Aluminum 2.063"W Oil Rubbed Bronze is an EPCO heavy duty magnetic catch designed for larger cabinet doors, so it holds bigger doors closed in institutional and commercial cabinets where stronger latching is needed. The aluminum case forms a sturdy housing for the lifetime magnet, which supports long-term holding strength under repeated opening and closing in busy environments. Its oil rubbed bronze finish presents a darker, traditional appearance that can coordinate with similar cabinet hardware in commercial millwork. The catch is classified under locks and latches as a cabinet catch, so it serves as the primary magnetic latching point between the cabinet door and frame. The 2.063 inch width gives a compact footprint on the cabinet while still providing room for the magnet and self-aligning case, which helps the catch work consistently even when doors are not perfectly positioned.
This EPCO heavy duty magnetic catch uses a self-aligning aluminum case to work with its strike plate, so the catch can adjust slightly as the door closes, helping the magnet and strike meet cleanly even if the door is not perfectly centered. Its 2.063 inch width keeps the mounting footprint tight, which suits narrow cabinet frames often found on commercial and institutional casework. The heavy duty magnetic holding force is tuned for larger cabinet doors, so when installed on these bigger doors it helps maintain a positive close without slamming mechanical latches. The lifetime magnet is built into the case, so once the catch is located and fastened, the holding strength remains consistent through repeated service cycles. This combination of compact size, self-alignment, and long-term magnet performance supports efficient, repeatable installation on multiple cabinets in the same project.
This EPCO magnetic catch is specified for larger cabinet doors, so it fits well on full-height or wide cabinet fronts in institutional and commercial cabinets that require stronger retention. Its role in the locks and latches category as a cabinet catch means it provides the primary magnetic hold between the door and its mating surface, which works well in storage, utility, or office cabinetry where doors are operated frequently. The aluminum case is self-aligning to the strike plate, so when mounted on casework runs, it helps each door find the magnet consistently, even if hinges allow minor play. In institutional settings, this self-alignment supports smoother closing by helping the magnet engage without precise door handling. The oil rubbed bronze finish also suits projects where darker decorative hardware is specified, so the catch can coordinate visually with other oil rubbed bronze cabinet components on the same run.
The heavy duty magnetic design is built for larger cabinet doors, which supports repeatable door closure by providing sufficient holding strength every time the door is pushed shut on institutional or commercial cabinets. The aluminum case creates a rigid housing that helps keep the magnet properly positioned relative to the strike, so once alignment is set, the contact remains consistent across thousands of open-close cycles. Because the case is self-aligning to the strike plate, it compensates for small shifts in door position, reducing finicky adjustments during installation and helping maintain clean engagement as hardware settles with use. The lifetime magnet specification means the magnetic element retains its strength throughout service, so latching feel stays consistent from the first installation onward. Combined with the compact 2.063 inch width, these details support efficient layout on multi-cabinet installations by allowing installers to repeat mounting locations and expect the same closing performance across each door.
The EPCO 592-ORB magnetic catch is designed as a heavy duty catch for larger cabinet doors, so it holds these doors closed on institutional and commercial cabinets.
The self-aligning aluminum case allows the catch to adjust toward the strike plate as the door closes, which supports reliable engagement even with minor door position variations.
The lifetime magnet maintains its holding strength through repeated openings, so commercial and institutional cabinet doors latch with the same feel over long-term service.
This heavy duty magnetic catch is used on larger cabinet doors in institutional and commercial cabinets, providing strong magnetic latching in those applications.
The 2.063 inch width provides a compact mounting footprint, which helps fit the catch on various cabinet rails or stiles without requiring large mounting surfaces.
The oil rubbed bronze finish gives the catch a dark, traditional look, which helps it coordinate with oil rubbed bronze hardware on commercial millwork and cabinetry.
The EPCO Magnetic Catch Aluminum 2.063"W Oil Rubbed Bronze brings a heavy duty magnetic design, a self-aligning aluminum case, and a lifetime magnet together for larger cabinet doors in institutional and commercial cabinets. Its compact width supports flexible placement on rails and stiles, while the oil rubbed bronze finish coordinates with matching cabinet hardware. For projects needing firm magnetic latching on bigger doors, this EPCO catch provides a focused option that is sized, finished, and built to work within demanding cabinet runs.
Sold In: 1 Each