extra heavy duty magnetic catch from EPCO is designed as a door retainer for heavy doors, so it holds substantial door weight in regular use. The solid brass case forms a rigid, corrosion-resistant body for the magnet, which supports long-term performance when the door is opened and closed repeatedly. The 3.5 inch length spreads the retainer contact over a larger area, which helps stabilize heavier doors at the closed position. The dull chrome finish on the catch provides a neutral, low-glare appearance that blends into many door and frame finishes in practical installations. As part of the Locks and Latches category, this catch fits into standard catch layouts where a magnetic solution is preferred. The EPCO brand and 593-DC part number give installers a precise reference on repeat jobs requiring the same heavy-duty magnetic retention.
The self-aligning solid brass case guides the catch into correct relation with the strike plate, which assists in achieving full magnet-to-strike contact when the door closes. The extra heavy duty door retainer design targets heavy doors, so installers can position it at a structural point on the door or frame that carries the load. The 3.5 inch overall length offers a defined mounting footprint, which helps when spacing the catch relative to hinges and nearby hardware. The dull chrome finish on the body presents a consistent surface around the working magnet, which supports clean contact with the strike plate without distracting reflections in the opening.
This extra heavy duty magnetic catch functions as a door retainer for heavy doors, so it suits openings where substantial closing force must be managed by a magnetic latch rather than a light-duty catch. The EPCO design uses a solid brass case, which adds mass and stability around the magnet, giving the assembly a firm presence wherever it is mounted on the door or frame. Measuring 3.5 inches in length, the catch provides a clear, repeatable reference for layout, helping installers keep multiple doors using the same setback and alignment. The dull chrome finish on the catch allows it to sit visually back from the face of the door, supporting use in both visible and less visible locations along the edge or jamb. As part of the Locks and Latches class of catches, this unit slots into projects where a magnetic solution is chosen to hold heavy doors closed in the everyday cycle of opening and closing.
The self-aligning case-to-strike relationship allows the catch to correct minor horizontal or vertical offsets as the door closes, promoting full magnet engagement without intricate tweaking. Because the magnet is described as a lifetime magnet, the holding force is intended to remain stable through years of door cycling, which supports predictable closing behavior across the service life of the opening. The solid brass case encloses and protects the magnet, which helps preserve that holding force by shielding the magnet from direct impact during normal door use. The 3.5 inch length adds leverage to the installation by spreading the mounting area, helping the catch resist the stresses created when heavy doors pull against the magnetic hold. With its extra heavy duty door retainer role and EPCO 593-DC identification, this catch can be specified repeatedly across similar projects where consistent magnetic performance and straightforward alignment are valued.
The extra heavy duty magnetic catch is described as a door retainer for heavy doors, so it is intended for applications where doors have significant weight or higher closing force.
The solid brass case is self-aligning to the strike plate, so the catch can compensate for small misalignments and bring the magnet and strike together as the door closes.
The EPCO 593-DC extra heavy duty magnetic catch has a 3.5 inch length, which gives installers a clear dimension for positioning on the door or frame.
The solid brass case provides a strong housing around the magnet, which supports stable alignment and long-term operation in its role as a heavy door retainer.
The phrase lifetime magnet indicates the magnetic element is intended to provide holding performance over the service life of the catch, supporting consistent door retention over time.
The dull chrome finish gives the magnetic catch a low-glare, neutral look, allowing it to visually blend with many door and frame finishes in functional installations.
The extra heavy duty magnetic catch from EPCO pairs a solid brass, self-aligning case with a lifetime magnet, so it is built around holding performance on heavy doors. The 3.5 inch length and dull chrome finish give installers clear, repeatable layout and a neutral appearance on jobs needing magnetic door retention. Using the EPCO 593-DC part reference keeps specifications consistent wherever this heavy duty magnetic catch is required across projects.
Sold In: 1 Each