Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 inch sliding track from EPCO is a high impact, extruded polystyrene track and guide system designed for small and light 3/4 inch doors, so shop-built cabinets and light panels can move on a defined path instead of dragging on casework. The 72 inch length gives enough run for many upper cabinets and small closet openings, which helps span wider cases without piecing shorter sections. The walnut finish provides a wood-tone appearance, which helps the hardware blend with darker cabinet interiors where visible edges matter on finished work. The track and guide system is described as sliding door hardware, so it serves as the primary running surface and guidance for the door instead of relying on improvised grooves. This setup supports a repeatable sliding motion on light doors, which matters when building multiple similar units.
This EPCO sliding door hardware is specified for 3/4 inch doors, so the spacing and running surfaces are intended around that door thickness, which supports predictable clearances during case construction. The 6 ft long track provides a continuous guide length, which reduces the need to join separate pieces along a run and limits potential bump points during sliding. The coordinated plastic upper guide 2234 and plastic track 234 work together as a guide system, so the door is managed at both top guidance and running path, which helps control wobble as the door moves. Because the hardware is categorized as sliding door hardware, it is suited for projects where a door must move laterally rather than swing, which matters when planning cabinet layouts in tight spaces.
This EPCO sliding door track and guide system is recommended for small and/or light 3/4 inch doors, so it fits well on cabinet doors, small closet panels, and similar light-duty applications where door weight stays modest. The 72 inch sliding door track length allows a single piece to manage many standard cabinet runs or openings, which keeps the sliding path continuous from end to end. As a plastic track 234 with a plastic upper guide 2234, the system uses matched components to carry and guide the door, which keeps the design consistent along the opening. The walnut finish on the track provides a darker tone that coordinates with many wood interiors, which helps the hardware visually sit behind the door rather than drawing attention at the opening.
The high impact, extruded polystyrene track gives the sliding path structure, so the door glides on a defined channel rather than wearing into wood, which supports long-term smooth motion on small and light doors. Four nylon button glides create the sliding interface, so contact points are low friction, which helps the door move with less effort during frequent opening and closing. The product is described as a track and guide system, so it addresses both directional guidance and bearing surface, which reduces side play when the door is moved quickly. The specific callout for 3/4 inch doors tells the installer the intended door thickness, which simplifies door construction decisions for cabinet and light panel work. The 6 ft long track provides a single, uninterrupted run in many cases, which helps align both doors and openings across the full width.
This EPCO sliding door hardware is recommended for small and/or light 3/4 inch doors, so it is suited to applications built around that door thickness.
The sliding track is described as 72 inches, or 6 ft long, so it spans many cabinet or small opening widths with a single continuous run.
The system uses a high impact, extruded polystyrene track with plastic upper guide 2234 and plastic track 234, so both guiding and running parts share compatible material.
Four nylon button glides provide a smooth sliding action, so the door rides on low-friction points rather than dragging across a surface.
The track has a walnut finish, giving a darker, wood-tone look, so it blends with many cabinet interiors where exposed hardware is visible.
The product is listed under sliding door hardware as a track and guide system, so it functions as the sliding path and guidance for light 3/4 inch doors.
This EPCO 3/4 inch sliding track pairs a high impact, extruded polystyrene body with four nylon button glides, so light 3/4 inch doors move on a defined, smooth path. The 72 inch length and walnut finish support cabinet-scale runs with a coordinated look. With plastic upper guide 2234 and plastic track 234 working together, the system manages both support and guidance for small and light doors. Select this sliding door hardware when the project calls for a 6 ft track and guide system sized for 3/4 inch doors.
Sold In: 1 Each
