Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO sliding door track is a single sliding door track designed as part of EPCO sliding door hardware, so it provides a dedicated running surface for sliding door systems that use compatible EPCO components. The track is 12 foot long, giving you continuous support across wide openings where a single run reduces joints. Its extruded aluminum construction forms a consistent profile, which supports predictable door movement along the full length. The track is 0.484 inch wide, so it establishes a defined channel width for matching hangers or carriers sized to that dimension. An oil rubbed bronze finish gives the track a dark, uniform appearance, which helps it blend with similar door and cabinet hardware in finished installations. The product is sold as Each, so ordering matches straightforward piece-count planning for jobs.
The 12 foot sliding door track length lets installers run a single continuous piece across the opening, which helps maintain straight alignment without mid-span transitions. The extruded aluminum profile provides a uniform geometry along the track, which supports predictable contact with sliding door hardware designed for this system. With a 0.484 inch wide track, installers can plan hardware layout around that fixed channel size, helping align hangers or guides that are dimensioned for this width. The oil rubbed bronze finish presents a consistent surface color, which supports clean visual lines when the track is exposed in the finished installation. Because the product is sold as Each, planning quantities for multi-opening projects becomes a direct count of track runs.
This single track can be used with the 725-A track base, so it can serve as the running surface in installations built around that base profile. It can also be used with the 730 track base, which gives installers another base option within the same EPCO sliding door hardware family. The ability to work with either 725-A track base or 730 track base allows one track style to cover both base configurations, simplifying standardization across related projects. At 12 foot long, the track can bridge wide cabinet, closet, or room openings where compatible EPCO bases are installed along the header or frame. The 0.484 inch width stays constant across the length, so the engagement between the bases and the track remains uniform wherever the door travels.
The 0.484 inch wide track dimension sets a clear interface for sliding door hangers sized to EPCO sliding door hardware, which helps control lateral play across the full travel. Extruded aluminum construction provides a rigid, shaped section that holds the designed channel, supporting repeatable movement where the door hangers contact the track. Because the profile is continuous over 12 foot, carriers experience the same geometry from end to end, which helps reduce points where doors could bind. The oil rubbed bronze finish helps the track coordinate with other oil rubbed bronze components in the opening, supporting a unified appearance when the track is visible. Within sliding door hardware assemblies that use the 725-A or 730 track base, this track acts as the upper guiding path that defines how the door moves.
The EPCO 726-ORB track is single track sliding door hardware, so it serves as the running surface for one sliding panel in EPCO-based sliding door systems.
The track is 12 foot long, giving a continuous run across wide openings where a single piece supports smoother door travel and layout.
The track can be used with the 725-A track base or with the 730 track base, so it fits into EPCO sliding door hardware built around those bases.
The track is 0.484 inch wide, which defines the channel size for selecting hangers or guides that are dimensioned to engage this width properly.
The EPCO sliding door track is extruded aluminum, providing a consistent, shaped profile that supports reliable contact with compatible sliding hardware.
The EPCO 726-ORB track has an oil rubbed bronze finish, giving it a dark appearance that aligns with other oil rubbed bronze sliding door components.
The EPCO sliding door track with manufacturer part number 726-ORB combines a 12 foot length, 0.484 inch width, and extruded aluminum profile to support EPCO sliding door hardware layouts. Its ability to be used with the 725-A track base or with the 730 track base allows it to serve across multiple EPCO base configurations on a project. With an oil rubbed bronze finish, it visually matches oil rubbed bronze sliding door hardware in the same opening. Sold as Each, it aligns directly with counting individual track runs when planning material for sliding door installations.
Sold In: 1 Each