EPCO upper guide track provides a defined path at the top of a sliding door opening, which keeps the door guided so it moves in line with the installed sliding door hardware. This track is designed for use as an upper guide, so it focuses on controlling the door at the head of the opening where stable tracking is critical. The part is also described for use as side jambs, so the same profile can be run vertically to guide or capture the panel along the sides of the opening for additional control. It is further described as a track base for 726 track, so it supports that mating track in a consistent, aligned channel for smoother sliding action. The oil rubbed bronze description identifies the visual tone, so the track can match other oil rubbed bronze sliding door hardware in the opening.
The track length is specified as 12 feet, so one piece can span wide openings or be cut down on site to match a smaller clear width as needed. The width is listed as 1.188 inch, so the framing or mounting surface can be laid out to accept that profile without guesswork. The track is described as an upper guide, so it is intended to sit at the head of the sliding door opening where it works in line with hangers and other sliding door components. It is also described as a track base for 726 track, so installers can position the 726 track directly in this channel for consistent alignment. The extruded aluminum construction creates a uniform shape over the whole length, which supports smoother movement when paired with appropriate sliding door hardware.
The product is classified as sliding door hardware, so it is used in openings where a door or panel travels along a path instead of swinging. It is described as an upper guide, so it mounts at the top of the opening and works with the hangers or rollers that carry the weight. The same profile is described for use as side jambs, so it can be mounted vertically at each side of the opening to help channel the door edge. It also functions as a track base for 726 track, so that specific track style sits in this profile when building a sliding door assembly. The 12 foot length supports long upper runs on wider door openings, which can reduce joints when spanning a wide casework or room opening with sliding panels.
The material is specified as extruded aluminum, so the track is formed in a continuous, consistent profile that helps rollers or guides engage the same shape along the full run. That consistency supports a more uniform sliding feel when matched with compatible sliding door hardware. The width is listed as 1.188 inch, so installers can size headers, jambs, or support members to that dimension, which helps keep the track seated firmly and aligned straight. The oil rubbed bronze description identifies a dark decorative finish, so the track can visually coordinate with oil rubbed bronze sliding door components in finished installations. The description that it serves as a track base for 726 track means the installer can place that track in a dedicated channel, which helps maintain parallel alignment between guide surfaces and the moving door. These combined details support predictable setup across upper guide runs, side jamb applications, and base track situations in sliding door projects.
The EPCO 730-ORB track is classified as sliding door hardware and is described as an upper guide track, so it forms part of the guiding system for sliding doors.
The upper guide track length is specified as 12 feet, so it can span wide openings or be cut to fit shorter sliding door runs during installation.
The EPCO upper guide track has a listed width of 1.188 inch, so framing and mounting surfaces can be laid out to match this measurement.
The extruded aluminum track is described for use as an upper guide, as side jambs, and as a track base for 726 track, so it can be applied in those locations.
The 12 foot guide track is specified as extruded aluminum, so it offers a uniform profile along its length for consistent engagement with sliding door components.
The oil rubbed bronze description identifies the finish tone of the track, so it visually coordinates with other oil rubbed bronze sliding door hardware in the opening.
The EPCO 730-ORB extruded aluminum upper guide track is described for use as an upper guide, side jamb, and track base for 726 track, so it covers multiple guide positions in a sliding door opening. Its 12 foot length and 1.188 inch width provide defined dimensions for planning head and jamb conditions. The oil rubbed bronze description supports visual alignment with matching sliding door hardware. For projects using sliding door hardware that follow these dimensions and roles, this track offers a defined profile to support guided movement.
Sold In: 1 Each