EPCO 830-8-DC oval closet rod provides a 96 inch long hanging rail in a compact 30mm high by 15mm wide profile, so it fits standard closet spans while keeping the rod low profile for built-in or cabinet layouts. The 8 FT length allows continuous runs across larger sections, reducing joint points in long closets and helping maintain an even line of hangers. The oval shape concentrates material where hangers bear, which supports consistent hanging performance compared with similar-size round tube. The dull chrome anodized aluminum finish gives a muted metallic look that blends with contemporary hardware while resisting surface wear in typical residential closet use. The 1mm wall thickness keeps weight down for easier handling during layout and cutting, while still supplying a defined shoulder for hanger movement along the rod.
The 15mm by 30mm oval cross-section on this EPCO aluminum closet rod defines clear bearing faces for flanges, guiding selection of matching oval supports for secure side mounting. Its 8 FT length arrives as a single continuous piece, which can then be cut to match closet interior spans for precise end-to-end placement between walls or vertical panels. The 1mm wall thickness in aluminum responds well to common metal-cutting tools, so installers can trim sections to integrate around partitions or create multiple shorter rods from one length. The dull chrome anodized finish covers all exterior faces, so cut segments maintain a consistent appearance across several compartments in the same project.
This 15mm x 30mm anodized aluminum oval closet rod suits closet and organization layouts that fall under the Closet Rods & Flanges category, where an oval profile is preferred for hanger orientation. The 96 inch length works well in reach-in or walk-in closets needing extended continuous hanging space along a wall or inside cabinet-style wardrobe sections. Because the tubing is aluminum with a 1mm wall thickness, it serves applications where a lighter-weight rod is useful, such as wall-mounted closet systems or built-in furniture where handling during assembly is constrained. The dull chrome finish coordinates with other dull chrome closet tubing and flanges, helping designers maintain consistent hardware color across a room.
The EPCO dull chrome 30mm H x 15mm W oval closet rod provides a defined shape that guides how hangers settle on the rail, leading to a tidier, repeatable arrangement along the full 8 FT run. The anodized aluminum surface treatment gives the tubing a uniform dull chrome appearance that stays consistent from one end to the other, which supports clean visual alignment when several rods are installed at the same height. The 1mm wall thickness balances material use with manageable weight, so cutting and fitting multiple rods from each length can proceed with a steady workflow. Its classification under Shelf, Closet & Garage Organization and Closet Tubing & Flanges keeps it aligned with typical closet hardware planning, simplifying coordination of rod positioning within shelving grids and vertical partitions.
The EPCO dull chrome oval closet rod has a 30mm height and 15mm width, giving a compact oval profile that sets hanger position and fits closely with matching oval flanges.
The oval aluminum closet rod is 96 inches, or 8 FT, long, allowing continuous hanging space across wider closet sections before cutting to shorter spans as required.
The 15mm x 30mm tubing is anodized aluminum with a 1mm wall thickness, providing light weight for easier handling and cutting during closet fabrication work.
The oval closet rod has a dull chrome anodized finish, giving a muted metallic look that coordinates with dull chrome closet tubing and flanges in organizational systems.
This EPCO rod falls under Shelf, Closet & Garage Organization and Closet Tubing & Flanges, aligning it with typical closet rod and flange planning.
The manufacturer part number is 830-8-DC, which identifies this specific 8 FT dull chrome 30mm x 15mm oval aluminum closet rod in EPCO product lines.
The EPCO 830-8-DC oval aluminum closet rod combines a 30mm by 15mm profile, 96 inch length, 1mm wall thickness, and dull chrome anodized finish, giving you defined dimensions for planning closet layouts. The oval tubing format in anodized aluminum aligns with Closet Tubing & Flanges setups, streamlining selection where an 8 FT dull chrome hanging rail suits your organization project.
Sold In: 1 Each