Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Oval center support 15mm x 30mm describes this EPCO 844-PC part as a closet rod component built around a 15mm x 30mm opening, so it fits oval closet tubing sized to that opening and keeps the rod aligned along long spans. The polished chrome plated zamack construction gives the support a hard, bright surface, which suits visible closet interiors where appearance matters as much as function. Zamack as the base material creates a rigid casting, so the support holds its shape around the oval opening under typical closet rod loads. The EPCO brand and 844-PC manufacturer part number identify the part consistently on plans and orders, simplifying reorders or matching to existing EPCO oval closet rods. Wurth Baer Supply lists this as Closet Rods & Flanges, so it is positioned for use as a structural support along closet tubing runs.
The 15mm x 30mm opening on the EPCO 844-PC sets the fit envelope for the closet rod, so matching oval tubing to that opening size keeps the rod from rocking or rattling during daily operation. This oval center support is described with a pan head #10 x 24 machined screw, so the mounting interface is sized around a #10-24 machine thread, which affects how it fastens to a bracket or substrate tapped for that thread. The polished chrome plated zamack body carries this mounting point as part of a rigid casting, so once fastened, the support and rod act together as a stable assembly along the closet interior.
The EPCO 844-PC is identified as an oval center support within Closet Rods & Flanges, so it serves as an intermediate support along oval closet tubing rather than an end flange. The 15mm x 30mm opening defines its match to standard oval closet rods built around that section, so installers can align this support under those rods wherever an additional bearing point is needed along the span. The polished chrome plated zamack build places it in polished chrome closet schemes, so it visually coordinates with polished chrome rods, flanges, and matching closet hardware when the doors are open. Because the zamack support is cast around the oval opening, it provides a consistent bearing surface along the rod, which helps maintain rod elevation across multiple supports in a straight line. Wurth Baer Supplys classification under Shelf, Closet & Garage Organization further ties it to organized storage layouts where rods carry hanging loads.
The stated 15mm x 30mm opening on the EPCO 844-PC gives installers a concrete dimension to align with their chosen oval tubing, so the center support can be laid out on a closet wall or panel to match the rods cross-section without trial-and-error fitting. With the polished chrome plated zamack material forming both the opening and the mounting boss, the support keeps the rod contact area and the mounting interface in one stable casting, which helps hold rod position over time under typical closet use. The integrated reference of brand EPCO and part number 844-PC anchors this geometry in the manufacturers line, so layouts, cut sheets, and replacements can call out the same support consistently. The presence of the pan head #10 x 24 machined screw specification defines the machine screw thread engaged at the mounting point, which supports predictable torque and seating when tying the support to its mating structure.
The EPCO 844-PC uses a 15mm x 30mm opening, so it is sized for oval closet tubing that matches that cross-section for a secure, aligned fit.
The polished chrome plated zamack on the EPCO 844-PC provides a bright visible finish over a rigid metal casting, so the support looks finished while holding the oval rod firmly.
The EPCO 844-PC is described with a pan head #10 x 24 machined screw, so its mounting interface is arranged around a #10-24 machine thread connection point.
Wurth Baer Supply lists the EPCO 844-PC under Closet Rods & Flanges and Closet Tubing & Flanges, so it functions as a center support within an oval rod system.
The EPCO 844-PC manufacturer part number uniquely identifies this oval center support, so drawings and orders can precisely match supports to existing EPCO oval rod layouts.
As an oval center support with a 15mm x 30mm opening, the EPCO 844-PC adds a bearing point under compatible oval rods, helping maintain alignment along longer closet runs.
The EPCO 844-PC oval center support combines a 15mm x 30mm opening, polished chrome plated zamack body, and a mounting detail built around a #10 x 24 machined screw, so it aligns closely with oval closet tubing in that size range. For projects already using EPCO oval rods and polished chrome closet hardware, selecting this specific 844-PC support through Wurth Baer Supply keeps the geometry, finish, and mounting thread consistent from drawing to installation.
Sold In: 1 Each