Open Flange for 1 and 1-1/16 Tubing gives you a mounting point for closet tubing that is sized specifically for 1 inch and 1-1/16 inch rod, so the rod seats securely and supports typical hanging loads in closet, shelf, and garage organization runs. The EPCO branding ties this flange to established closet rods and flanges lines, which helps keep hardware consistent across a project when matching existing EPCO parts in a closet or storage system. The dull chrome finish on this open flange presents a subdued metallic look that works well where hardware should be visible but not reflective, useful in closets with lighting where glare is a concern. A zinc construction noted in the description provides a metal body suited to normal interior woodworking environments, so the flange can be used in residential closets, storage cabinets, or light-duty garage organization layouts that match the specified tubing sizes.
The EPCO 850-DC open flange serves as a fixed support point for 1 inch and 1-1/16 inch tubing, so positioning this flange sets the line and grade for the closet rod run and determines how well hangers clear doors, shelves, and walls. Because the flange is open style, the rod drops into the flange from above, which helps when fitting tubing between two walls or panels where it is easier to cut the rod to length and then rest it into the flange opening instead of threading it through a closed cup. Using a zinc flange sized exactly to the specified tubing diameters helps control side-to-side movement at the mounting location, so the rod feels more stable in typical closet and storage use.
The Open Flange for 1 and 1-1/16 Tubing fits naturally into closet, shelf, and garage organization projects that use round tubing in those sizes, because the flange is part of a Closet Rods & Flanges class and Closet Tubing & Flanges category. In a standard closet layout, one or more 850-DC flanges can be used at cabinet sides or end panels to carry the specified diameter rod, giving a designated bar position for hanging clothes or equipment. In shelf and garage settings, the same flange and tubing combination can be applied under shelves or between vertical supports for general storage where the rod diameter and metal flange body suit the intended load. Matching the EPCO brand flange to EPCO closet tubing helps keep the system within a single product line, which is useful when a project calls out that manufacturer in its hardware schedule.
Because the EPCO 850-DC open flange is made for both 1 inch and 1-1/16 inch tubing, installers have flexibility to use either common rod size while still landing in the same flange footprint, which simplifies planning when different closet sections call for slightly different tube diameters. The dull chrome surface helps the flange visually blend with rods that have a similar finish, so the transition from rod to support looks intentional rather than mismatched, which matters where closet interiors are part of the overall design. The zinc construction noted in the web description gives the flange a metallic structure that pairs well with metal tubing, creating a homogeneous hardware set that behaves predictably under normal closet loads. The EPCO 850-DC part number on this open flange ties into documented product lines, which supports consistent specification across multiple units and phases of the same residential or commercial woodworking project.
The EPCO 850-DC open flange is specified for 1 inch and 1-1/16 inch tubing, so it holds standard closet rods in those diameters for typical hanging and storage use.
The dull chrome finish provides a low-sheen metallic look that coordinates with similar closet hardware, which helps rods and flanges appear uniform in visible closet interiors.
The web description notes zinc, so the open flange uses a metal body that works with the specified tubing in normal interior closet and storage environments.
This open flange is listed under Shelf, Closet & Garage Organization and Closet Tubing & Flanges, so it is intended for closet rods and similar storage layouts using the specified tubing sizes.
The EPCO branding and 850-DC part number align this open flange with EPCO closet rods and flanges, which helps projects keep hardware consistent across multiple storage sections.
The open design lets the 1 inch or 1-1/16 inch tubing drop into place from above, which helps when positioning rods between walls or panels after cutting to length.
The EPCO Open Flange for 1 and 1-1/16 Tubing in dull chrome gives you a zinc-based mounting point built around those specific rod diameters, so closet, shelf, and garage organization runs can be laid out with predictable support. Using the EPCO 850-DC part within the Closet Rods & Flanges class aligns the flange with matching closet tubing and related EPCO components, which supports consistent appearance and fit from one storage section to the next. For projects that call for round closet rods in 1 inch or 1-1/16 inch sizes, this open flange provides a defined end support that helps translate design dimensions into a straightforward installation layout.
Sold In: 1 Each