Open flange for 1-1/4 and 1-5/16 tubing defines this Epco 851-DC component as a support point for round closet tubing, so it helps carry hanging load along closet, shelf, or garage runs that use these tube sizes. The sizing for 1-1/4 inch and 1-5/16 inch tubing means the flange works with common closet rod diameters, so installers can match it to typical closet rods used in woodworking projects. The dull chrome finish on this open flange presents a muted metal appearance, so it fits projects that call for chrome tone without a high-gloss look. The zinc construction stated in the web description identifies the base metal, so users know they are working with a zinc part when planning closet rods and flanges. Classification under closet rods and flanges places this part in a closet tubing support system, so it serves as a structural and visual endpoint or intermediate support for the tube.
The statement "for 1-1/4 inch and 1-5/16 inch tubing" defines the receiving area of this Epco 851-DC open flange, so installers align their rod choice to those tube diameters when laying out closet or garage hanging runs. Because the flange is categorized under closet tubing and flanges, it sits at the end or support point of the round tube, so it provides a defined interface where the tube meets a wall or structural panel. The open flange style noted in the product name indicates that the tube meets an open-side support rather than a closed cup, so fit-up allows sliding the rod into position from the side during assembly or adjustment of the closet rod line.
The category shelf, closet and garage organization places this Epco 851-DC open flange in storage builds that rely on tubing, so it is applied wherever a round rod carries hangers or similar loads. Within closet tubing and flanges, this part aligns specifically with 1-1/4 inch and 1-5/16 inch tubing, so it is suited to rods sized to those two common diameters in closet interiors and garage hanging rails. The dull chrome finish described in the name sets a low-sheen look on visible hardware, so it fits open closet fronts, utility spaces, or garage runs where exposed metal should appear orderly without mirror gloss. As a member of the closet rods and flanges product class, this open flange acts as one of the fixed points that hold the rod, so its position along walls or panels defines the span and usable hanging width in the finished installation.
The explicit sizing for 1-1/4 inch and 1-5/16 inch tubing gives a tight match between rod and open flange, so fabricators can design spans and support spacing around these tube diameters with predictable engagement at each support. The zinc construction referenced in the web description indicates the base material, so users know they are working with zinc when drilling near the flange or coordinating it with other zinc closet tubing and flanges components in the same project. The dull chrome identifier in the product name defines the surface treatment, so the visible face of the flange aligns with other dull chrome closet rods and flanges hardware across a run of cabinets or wall sections. Branding as Epco with manufacturer part 851-DC ties this open flange to a specific catalog number, so shops and installers can reorder the same zinc open flange for tubing when repeating a closet layout or extending an existing run.
The Epco 851-DC open flange is described as for 1-1/4 inch and 1-5/16 inch tubing, so it fits closet or garage rods manufactured to those two standard diameters.
The open flange for 1-1/4 and 1-5/16 tubing is specified as dull chrome, so its low-sheen metallic surface visually coordinates with other dull chrome closet tubing components.
The web description identifies the part as zinc, so the Epco 851-DC open flange uses zinc construction when supporting closet tubing in storage projects.
The classification under shelf, closet and garage organization and closet tubing and flanges shows this flange is used wherever 1-1/4 inch or 1-5/16 inch tubing supports hanging storage.
The product name states open flange, so the design supports the rod from an open side, letting installers slide 1-1/4 inch or 1-5/16 inch tubing into place along the support points.
The manufacturer part 851-DC uniquely identifies this dull chrome zinc open flange, so shops can specify the same component whenever copying or extending a closet tubing layout.
The Epco 851-DC open flange is defined for 1-1/4 inch and 1-5/16 inch tubing, so it aligns with common closet rod diameters when planning new storage runs or modifying existing layouts. Its zinc construction with a dull chrome finish, confirmed in the description, delivers a clearly identified metal and appearance for projects built around closet tubing and flanges. When a job calls for an open-style support that fits these tube sizes and matches dull chrome hardware, this open flange for 1-1/4 and 1-5/16 tubing offers a consistent, catalog-traceable choice.
Sold In: 1 Each