Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Round center support for 1 in tubing describes this EPCO 853-ORB part as a dedicated support for closet tubing in the 1 in to 1-1/16 in range, so it stabilizes round rods sized to those diameters in typical closet layouts. The product is identified as a Round Center Support for 1"-1-1/16" Tubing Oil Rubbed Bronze - Epco 853-ORB, which directs it to round closet rods rather than other profiles, giving you a defined fit band for planning spans. Its classification under Closet Rods & Flanges ties it specifically to hanging storage runs, where sag control at mid-span matters for day-to-day use. The SAP description "CENTER SUPP FOR 1IN/1-1/16INTUBING,ORB" confirms it is intended as a mid-span support, helping distribute hanging loads along the rod instead of concentrating stress at the ends.
The Round Center Support for 1"-1-1/16" Tubing Oil Rubbed Bronze - Epco 853-ORB is dimensioned specifically for 1 in and 1-1/16 in tubing, so layout work centers on those two rod diameters when you place intermediate supports. Because the product belongs to the Closet Rods & Flanges class, it is intended to work as a structural touchpoint in a closet rod assembly rather than decorative trim, so spacing and alignment follow typical closet rod practices. The zinc round center support body creates a defined seat for the rod, helping you position the tubing consistently across multiple supports so hangers slide without catching. Its center-support role, identified in the SAP description, means it works between end flanges to control flex in long spans.
The EPCO Round Center Support for 1"-1-1/16" Tubing Oil Rubbed Bronze - Epco 853-ORB is geared to closet rod runs that use 1 in or 1-1/16 in round tubing, so it fits standard residential and light commercial hanging sections using those sizes. Its place in the Shelf, Closet & Garage Organization category ties it to storage layouts where hanging garments or similar items sit on a rod, and that context keeps its role focused on rod support rather than shelving. Within the Closet Rods & Flanges product class, this center support acts between end flanges to share the load, so it is most useful on longer spans where a single support at each end would leave the tubing more prone to bending. The zinc construction, noted in the Web Description, supplies a rigid support point for the tubing, so the round rod bears on metal rather than softer materials along the run.
The defined fit range of 1 in and 1-1/16 in tubing gives the Round Center Support for 1"-1-1/16" Tubing Oil Rubbed Bronze - Epco 853-ORB a clear sizing target, so installers can match rods and supports without trial sizing or oversize gaps. The oil rubbed bronze finish described in the product name sets a dark surface tone that visually ties into oil rubbed bronze closet tubing and related hardware, so visible supports maintain a consistent look along open rods. As a center support specifically identified in the SAP description, this part is chosen with the understanding that it will work between terminal flanges, so loads from hangers and garments are transferred at multiple points along the tubing rather than only at the closet walls. The zinc material called out in the Web Description provides a sturdy bearing for these loads over time, so contact points on the round rod stay supported by metal and help preserve the straightness of the closet tubing under regular use.
The Round Center Support for 1"-1-1/16" Tubing Oil Rubbed Bronze - Epco 853-ORB is designed for 1 in and 1-1/16 in round tubing, so it targets those two common closet rod diameters.
The Web Description notes the part is zinc, so the center support body is zinc-based metal, providing a firm seat for the rod in closet rod applications.
The SAP description calls it a center support for 1 in and 1-1/16 in tubing, so it is used as a mid-span support between end flanges on longer closet rods.
The product name specifies Oil Rubbed Bronze, so the visible surface is in an oil rubbed bronze finish that coordinates with other hardware in that color family.
The product class is Closet Rods & Flanges, so this center support is part of the same system of hardware that carries and locates the closet rod.
The name Round Center Support for 1"-1-1/16" Tubing identifies it for round tubing, so it is intended for round closet rods in the stated diameters.
The Round Center Support for 1"-1-1/16" Tubing Oil Rubbed Bronze - Epco 853-ORB from EPCO provides a zinc center support designed around 1 in and 1-1/16 in round tubing, so it aligns with those closet rod diameters. Its place in the Closet Rods & Flanges class defines it as a structural support component for closet rod runs rather than a general bracket, so it suits installations built around matching closet tubing. For closet projects using rods in that size range with an oil rubbed bronze finish, this center support gives a matching, load-sharing point along the span.
Sold In: 1 Each