closed flange for 1-1/4 and 1-5/16 tubing from EPCO is a closet rod flange that supports round tubing sized for 1-1/4 inch and 1-5/16 inch rods, so one part can serve both common closet rod diameters in a project. The Epco 861-DC dull chrome flange is identified as a closed flange, which positions the tubing inside a surrounding collar so the rod seats securely at the closet end. The product is made from zinc, which provides a rigid metal base to hold the closet rod in place under typical hanging loads. This flange belongs to the Closet Rods & Flanges class within shelf, closet, and garage organization, so it fits standard closet layout work where round tubing is used for hanging space. Wurth Baer Supply offers this Epco 861-DC flange so closet builders can match rod size requirements with a defined dull chrome finish.
This closed flange for 1-1/4 inch and 1-5/16 inch tubing is sized so round closet rods in those diameters sit within the flange opening, defining how the rod meets the wall or panel. The closed style encloses the rod end, which helps control lateral movement at the termination point. With zinc construction, the flange provides a metal contact surface between the rod and the mounting substrate, which supports the interface where hanging loads transfer to the structure. The dull chrome finish allows the visible face of the flange to align with dull chrome closet rods or hardware, helping maintain a unified look across the closet front. As part of the Closet Rods & Flanges class, this Epco 861-DC component serves as a dedicated endpoint for closet tubing runs in organization projects.
The closed flange for 1-1/4 inch and 1-5/16 inch tubing is intended for round closet rods matching those sizes, so a single flange style can serve either diameter in a layout. By defining the rod seat inside a closed collar, the flange creates a fixed stop for the tubing at the end of a run, which helps align hanging space consistently across multiple openings. The zinc body sets a rigid point where the rod meets a wall or panel, letting closet loads transfer through metal rather than directly through the rod to the substrate. Because this part sits within the Closet Rods & Flanges category used for shelf, closet, and garage organization, it aligns naturally with standard rod-and-flange closet designs that rely on defined end supports.
The Epco 861-DC part number uniquely identifies this dull chrome closed flange, which helps shops repeat past installations by specifying the same component when additional sections or matching closets are built. The dull chrome finish gives a subdued metallic surface at the rod endpoint, which helps finished jobs maintain a consistent appearance when paired with dull chrome rods or nearby fittings. Zinc construction provides a stable metal interface for the closet tubing, which supports long-term alignment at the rod ends where movement tends to concentrate. Because the flange is specifically described for 1-1/4 inch and 1-5/16 inch tubing, installers can coordinate those common closet rod sizes with this single closed flange style across a project.
The Epco 861-DC closed flange is described for 1-1/4 inch and 1-5/16 inch tubing, so it supports closet rods in those two common diameters for hanging applications.
The closed flange surrounds the rod end in a collar, so the tubing seats inside the flange and the rod endpoint stays located at the mounting position.
This closed flange is described as zinc, giving the part a metal body that supports the closet rod at the point where it meets the wall or panel.
The flange is listed in the Closet Rods & Flanges class within shelf, closet, and garage organization, so it is used at closet rod endpoints in storage layouts.
The dull chrome finish provides a low-gloss metallic look, allowing the flange to visually coordinate with dull chrome closet rods and related hardware.
The Epco 861-DC part number precisely identifies this closed flange for 1-1/4 inch and 1-5/16 inch tubing, helping projects match or reorder the same flange style.
The closed flange for 1-1/4 inch and 1-5/16 inch tubing from EPCO gives closet projects a dedicated endpoint for round rods in those sizes, using a zinc body with a dull chrome finish. The Epco 861-DC part number ties this specific closed flange to Closet Rods & Flanges work within shelf, closet, and garage organization. Select this dull chrome flange when closet layouts call for a closed collar support at the rod end, so the tubing seats at a defined point in the overall hanging system.
Sold In: 1 Each