EPCO stainless steel closet rod is a round closet rod designed for closet and storage applications, using bright solid stainless steel to provide a smooth hanging surface that supports regular sliding of hangers in wood or built-in systems. The 1-1/16 inch outside diameter sets a substantial rod size that works well in typical closet layouts, giving installers a consistent dimension to coordinate with flanges and side panels. The 8 foot length offers a long continuous span that can be cut down if a shorter run is required on the job, which helps reduce waste across multiple openings. The 14 gauge wall thickness defines a heavier tubing wall than light sheet metal, giving the rod a solid feel when mounted in closet organizers or shelf systems. The stainless steel material keeps the appearance bright in normal indoor environments, supporting projects where visible hardware needs a clean, modern look.
The 1-1/16 inch outside diameter on this EPCO stainless steel closet rod establishes the main sizing reference for installation, guiding the selection of matching closet flanges and bore locations in end panels or partition walls. The 8 foot long format lets installers trim the stainless tubing to precise spans between vertical supports, which supports accurate fit in reach-in, walk-in, or wall-mounted closet runs. The 14 gauge wall thickness gives enough material for clean cutting with appropriate metal-cutting tools, benefiting shop workflows that rely on repeatable lengths. The bright solid stainless steel finish provides a smooth surface along the rod, assisting hanger movement as garments are added or rearranged across the hanging space.
This EPCO stainless steel closet rod, with its 1-1/16 inch outside diameter, suits closet, shelf, and garage organization layouts that call for a defined hanging bar size, allowing designers to coordinate rod positions with shelving above or below. In longer wall runs, the 8 foot length supports wider spans or multiple openings from a single piece, which is useful when planning continuous wardrobe sections along a wall. The bright solid stainless steel surface presents a clean metallic appearance that aligns well with laminate, melamine, or painted casework, supporting projects where open closets remain visible in bedrooms, hallways, or storage rooms. The round profile of the tubing works with standard round flanges from the same size class, which helps align rod centerlines across multiple bays for a uniform look.
The defined 1-1/16 inch outside diameter provides a consistent measurement for fabricators setting up jigs or stops for drilling flange holes, which helps keep rod heights uniform across a bank of closets. The 14 gauge wall thickness gives the rod enough structure to accept precise cuts, so installers can square the ends for tight seating against flanges or side panels. With an 8 foot long stainless steel tube, shops can stage cutting in batches, optimizing offcuts when laying out several shorter sections for different openings. The bright solid stainless steel material maintains the same finish along the full length, so cut sections retain a uniform appearance when used in adjacent compartments or matching closets. The EPCO 870-8 part number anchors these dimensions and material in a single identifier, streamlining ordering and documentation on drawings or cut lists.
The EPCO 870-8 stainless steel closet rod has a 1-1/16 inch outside diameter, giving installers a clear dimension for selecting compatible flanges and setting consistent hanging heights.
The rod is 8 feet long, providing a full-length stainless steel tube that can be used for wide closet spans or cut into multiple shorter sections on a project.
The EPCO 870-8 rod uses bright solid stainless steel, giving the hanging surface a polished metallic look that suits visible closet and storage installations.
The closet tubing has a 14 gauge wall thickness, creating a heavier tube wall that supports a solid feel when the rod is mounted between closet sides.
This stainless steel round closet rod fits closet, shelf, and garage organization layouts, working with closet tubing and flanges sized for a 1-1/16 inch diameter rod.
The rod is identified by the EPCO brand and manufacturer part number 870-8, giving shops a consistent stainless closet tubing reference for repeat jobs.
The EPCO stainless steel closet rod pairs a 1-1/16 inch outside diameter with an 8 foot length, giving installers a clear standard for planning hanger runs in closets or storage areas. The 14 gauge wall thickness and bright solid stainless steel material support a solid, polished hanging surface that integrates well with closet tubing and flange systems sized for this diameter. For projects that benefit from repeatable dimensions and a defined rod specification, the EPCO 870-8 stainless steel closet rod offers a straightforward stainless tubing choice for closet and organization layouts.
Sold In: 1 Each