EPCO satin nickel closet rod uses aluminum construction, which keeps the 8 foot length manageable to handle while still providing a solid hanging surface for organized closet runs. The 1-1/16 inch outside diameter establishes a familiar round profile that works well where standard rod brackets sized to that diameter are used. The tubing is manufactured in a 14 gauge wall thickness, so the rod wall is reasonably substantial for typical closet hanging applications while remaining light enough for straightforward cutting to length on site. The full 8 foot long section lets installers span wider closet sections in one piece when layouts allow, which helps create clean, uninterrupted hanging lines. The satin nickel appearance gives the aluminum a neutral, finished look that coordinates with many closet systems and casework styles in residential or light commercial work.
The stated 1-1/16 inch outside diameter anchors layout decisions around brackets and end supports that are sized for that measurement, which helps maintain a snug mechanical fit and reduces play at each support point. The 14 gauge wall thickness gives installers a known wall dimension when cutting or deburring the aluminum tubing, which supports cleaner cuts and smoother hanger travel along the finished rod. With an overall length of 8 feet, the rod section can be measured and trimmed to match closet interior dimensions while still leaving enough stock for typical single-span installations. The satin nickel aluminum body provides a consistent circular profile end to end, supporting level alignment when multiple rods of this size are installed within the same closet system.
The EPCO satin nickel 1-1/16 inch round closet rod is designed around closet organization tasks where a defined hanging tube is needed within shelving and closet frameworks. Its 8 foot length suits reach-in and walk-in closet layouts that benefit from a single continuous span across a back wall or between casework sides. The aluminum material helps when rods must be lifted into higher positions or maneuvered inside built cabinetry, because the lower weight compared with many steel tubes reduces strain during handling. The satin nickel finish coordinates visually with closet systems and organization hardware that also use satin nickel tones, supporting consistent appearance across rods, flanges, and other visible components.
The defined 1-1/16 inch outside diameter gives a dependable reference for repeating installations across multiple closets, so once matching supports are selected for one build, the same sizing approach can be applied to additional runs. The 14 gauge wall thickness helps the aluminum tube hold its round shape during cutting and mounting, which supports smoother hanger movement and better long-term alignment of the rod. With the rod supplied as a straight 8 foot section, installers can standardize measuring and cutting procedures for similar closet widths, improving efficiency across production work or multi-unit projects. The satin nickel surface, carried consistently along the aluminum tube, supports a professional appearance when rods are visible at eye level in open closet systems or wardrobe cabinetry.
The EPCO aluminum closet rod has a 1-1/16 inch outside diameter, which sets the sizing reference for selecting matching flanges and brackets in a closet system.
The EPCO satin nickel aluminum closet rod is 8 feet long, allowing single-span runs in many closet openings before any trimming to fit specific widths.
The 890-8-SN closet rod uses aluminum construction, which keeps the tubing lighter for handling and cutting while still providing a defined round hanging surface.
This EPCO aluminum closet rod has a 14 gauge wall thickness, giving a substantial tube wall that supports normal closet hanging loads and clean cuts.
The satin nickel finish on the aluminum closet rod provides a neutral, finished appearance that coordinates with other satin nickel closet components and trim.
The EPCO 8 foot aluminum closet rod suits closet organization applications where a continuous 1-1/16 inch diameter hanging tube is needed across a span.
The EPCO satin nickel 1-1/16 inch diameter, 8 foot long, 14 gauge aluminum closet rod provides a clearly defined size and finish for building out closet hanging space. The combination of known outside diameter, gauge, and length supports consistent planning when laying out bracket locations, cutting rods to width, and aligning multiple sections across a project. For closet organization work where a round aluminum tube with satin nickel appearance fits the design and dimension requirements, this EPCO 890-8-SN closet rod offers a straightforward, specification-driven option ready to integrate into your next closet installation.
Sold In: 1 Each