Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Architectural Series aluminum pull gives you a 96 mm center to center mounting layout, which sets consistent spacing between fasteners so cabinet and drawer fronts line up cleanly across a run. The overall length of 110 mm (4.33 inch) provides a comfortable hand grip while still fitting smaller drawer fronts or narrow doors commonly used in residential or commercial cabinetry. The pull width of 25 mm (0.98 inch) offers a stable feel against the fingertips, helping doors and drawers open smoothly without digging into the hand. A projection of 30 mm (1.18 inch) stands the pull off the face of the cabinet far enough for an easy grab, which helps when users have larger hands or when doors are flush with surrounding panels. As part of EPCO decorative hardware and moldings, this handle supports a coordinated look across multiple fronts.
The EPCO AC2130-096-SS aluminum handle uses a 96mm hole center to center dimension, which allows straightforward alignment with standard drilling jigs and patterns for handles and pulls. With its 110mm (4.33 inch) overall length, the pull slightly overhangs the drilled centers, giving enough bar at each end for a balanced appearance on cabinet doors and drawers. The 25mm (0.98 inch) width leaves room around the pull on narrow stiles, which helps maintain consistent reveals between adjacent fronts. A 30mm (1.18 inch) projection offsets the grip from the surface, offering clearance that supports comfortable hand access even when fronts are flush-mounted. Identifying it as part of EPCO handles and pulls keeps this pull aligned with the Decorative Hardware and Moldings category, which helps match similar pieces within the same installation.
The EPCO Architectural Series aluminum pull with 96mm hole center to center suits cabinets and drawers that follow this common drilling standard, which helps keep layouts consistent across kitchens, baths, or built-ins. Its 110mm (4.33 inch) overall length makes it a good fit where space is limited, such as smaller drawer banks or utility cabinets, while still providing enough handle surface for comfortable daily operation. The 25mm (0.98 inch) width helps the pull sit proportionally on medium-width rails and stiles, which supports a balanced look when multiple pulls are lined up. With a 30mm (1.18 inch) projection, the handle stands off the door or drawer face enough for fingers to grab from above, below, or the side, which can be useful on tall pantry doors or deep drawer fronts.
The 96mm center to center measurement defines the drilling pattern for the AC2130-096-SS handle, which lets installers rely on standard templates to repeat hole locations and reduce layout time. Because the overall length is 110mm (4.33 inch), the bar extends modestly beyond the mounting holes, which creates even margins at each end that can help align with surrounding design lines on the cabinet. The 25mm (0.98 inch) width gives enough face area for the hand to contact the pull without concentrating pressure, which supports user comfort on doors or drawers that see frequent opening and closing. Its 30mm (1.18 inch) projection holds the grip away from the front surface, which reduces knuckle contact with the cabinet face during use and aids users wearing gloves. The EPCO product identity and the AC2130-096-SS part number help match existing installations, which supports consistent appearance across multi-room projects.
The EPCO Architectural Series aluminum pull uses a 96mm hole center to center spacing, which sets the drilling distance between mounting points for cabinets and drawers.
The AC2130-096-SS handle has an overall length of 110mm (4.33 inch), which provides a compact bar that still offers a practical gripping surface on doors and drawers.
The EPCO aluminum pull projects 30mm (1.18 inch) from the cabinet face, which gives fingers space behind the handle for a comfortable grip during use.
The EPCO Architectural Series pull has a width of 25mm (0.98 inch), which helps distribute pressure across the fingers for smoother door and drawer operation.
The 96mm center to center layout matches a common handle pattern, which works efficiently with standard drilling jigs during cabinet or drawer front installation.
This handle is identified as EPCO AC2130-096-SS, which links it to EPCO handles and pulls in the Decorative Hardware and Moldings category.
The EPCO Architectural Series aluminum pull with 96mm hole center to center gives a clear mounting pattern backed by defined dimensions, including 110mm (4.33 inch) overall length, 25mm (0.98 inch) width, and 30mm (1.18 inch) projection. Those measurements help align the handle with cabinet proportions, support comfortable gripping, and keep layouts consistent across doors and drawers. Using the AC2130-096-SS part number connects this specific EPCO handle to other Decorative Hardware and Moldings options from Wurth Baer Supply, so projects can standardize on the same pull style from one source.
Sold In: 1 Each