Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Architectural Series aluminum pull gives you a straightforward handle option for cabinetry and casework where a 128mm center to center layout is already drilled or planned. The pull provides a 128mm hole center to center, so it drops onto standard metric drill patterns common in many shop templates. The overall length of 143mm (5.62 inches) spans slightly beyond the screw centers, giving a balanced grip across typical drawer and door fronts. A width of 25mm (0.98 inches) creates a comfortable contact surface for fingers during daily use on frequently opened fronts. The 30mm (1.18 inches) projection stands the pull off the face enough for a clear hand grip while keeping the front profile compact. The EPCO branding and Architectural Series designation place this handle in a decorative hardware and moldings class suited to finished cabinet installations.
The 128mm center to center drilling dimension guides hole layout when setting up doors and drawers for this pull, keeping mounting points consistent across a run of cabinets. The 143mm (5.62 inches) overall length helps with visual planning, letting you position the pull so it lands comfortably on narrower doors while still looking substantial on wider fronts. A 25mm (0.98 inches) width affects how much flat area you need on the stile or rail, which matters when working near panel edges or decorative profiles. The 30mm (1.18 inches) projection defines how far the hand grip extends from the surface, which is useful when coordinating with adjacent doors, appliances, or nearby hardware in tight installations.
This EPCO Architectural Series 5-1/16 inch (128mm) center to center aluminum pull is categorized under decorative hardware and moldings, placing it in typical cabinet, furniture, and casework environments. The 128mm center to center dimension lines up with many metric cabinet drilling systems, so it suits new construction layouts that follow that standard. With an overall length of 143mm (5.62 inches), the pull works on medium-width drawer fronts and doors where a compact but visible handle is preferred. The 25mm (0.98 inches) width and 30mm (1.18 inches) projection suit doors and drawers that need enough finger room without pushing the hardware far off the face, which is helpful on shallow cabinets or tight walkways. Being an aluminum handle with the SAP description ALUMINUM HANDLE,5.62INL,128MM CC,STEEL, it fits applications calling for a metal pull in this size range within EPCO decorative hardware lines.
The 128mm center to center drilling dimension lets installers repeat the same boring setup across multiple fronts, which supports consistent handle alignment on full cabinet runs. Using the 143mm (5.62 inches) overall length when laying out elevations helps space handles evenly between edges and neighboring pulls, reducing visual mismatch from door to door. The 25mm (0.98 inches) width affects where the pull sits relative to panel profiles, so designers can keep it fully on flat sections for a clean, practical grip. With a 30mm (1.18 inches) projection, the pull gives enough finger clearance for repeated opening without requiring deep standoffs that could interfere with adjacent doors. The manufacturer part number AC2130-128-SS and the EPCO brand give a precise identifier, which matters when matching existing hardware or specifying the same handle for repeat projects through Wurth Baer Supply.
The EPCO Architectural Series aluminum pull has a 128mm hole center to center dimension, so mounting holes are spaced 128mm apart for proper installation on cabinet fronts.
The AC2130-128-SS aluminum handle has an overall length of 143mm, or 5.62 inches, which helps it span a useful area on drawer fronts and doors.
The aluminum pull has a 30mm, or 1.18 inch, projection, setting the grip off the cabinet surface to give finger clearance during opening and closing.
The EPCO Architectural Series pull has a width of 25mm, or 0.98 inches, providing a comfortable gripping surface across the handle face.
This EPCO aluminum handle is identified by manufacturer part number AC2130-128-SS and SAP description ALUMINUM HANDLE,5.62INL,128MM CC,STEEL.
The AC2130-128-SS pull is listed under decorative hardware and moldings in the handles and pulls product class, aligning it with finished cabinet and furniture work.
The EPCO Architectural Series aluminum pull with 128mm center to center drilling, 143mm (5.62 inch) overall length, 25mm (0.98 inch) width, and 30mm (1.18 inch) projection offers defined dimensions for planned layouts. Using the AC2130-128-SS identifier through Wurth Baer Supply helps align your next cabinet run around a consistent handle size and appearance within EPCO decorative hardware.
Sold In: 1 Each