Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Architectural Series aluminum pull gives you a 160mm hole center to center layout, which ties directly into common drilling patterns on cabinets and casework, helping layouts stay consistent across a run. The 174mm (6.85 inch) overall length provides a comfortable hand span while keeping the pull compact on narrower drawer fronts. A 25mm width creates a solid gripping surface that is easy to grab during daily use. The 30mm (1.18 inch) projection stands the pull off the face enough for fingers to wrap behind it, supporting smooth opening on heavier doors and drawers. The aluminum handle construction keeps weight down compared to many steel pulls, which can help on large banks of fronts where hardware weight adds up.
This EPCO Architectural Series aluminum handle uses a 160mm hole center to center mounting, so the two mounting points are spaced to match that dimension along the cabinet front. The 174mm (6.85 inch) overall length means the handle extends slightly beyond the mounting centers at each end, which helps position the grip area near the center of the hardware. The 30mm (1.18 inch) projection defines the stand-off from the surface, influencing how the pull feels in the hand when mounted on doors or drawer fronts. The product description specifies #8-32 thread screws, so the handle is tapped for that thread size, aligning with common cabinet hardware installation practices.
This EPCO Architectural Series 160mm hole center to center pull fits layouts where cabinets or fixtures are bored for that specific spacing, keeping handle positions uniform across a bank of doors and drawers. The 174mm (6.85 inch) overall length lets the pull sit comfortably across medium-width fronts, helping maintain proportion on both doors and wider drawers. With a 25mm width, the pull presents a defined bar on the face of the cabinet, which can align visually with other decorative hardware and moldings in the same area.
The 30mm (1.18 inch) projection makes the pull stand proud of the surface, which affects how easily fingers can get behind it when mounted on thicker fronts. The aluminum handle description identifies it as part of a decorative hardware solution, putting it in line with other EPCO handles and pulls for coordinated projects.
The specified 160mm hole center to center measurement provides a clear reference for drilling jigs, fixture setup, and shop drawings, so multiple installers can work from the same dimension on a job. The 174mm overall length gives a known edge-to-edge size for layout on narrower rails or drawer fronts, helping maintain consistent margins from edges.
The 25mm width and 30mm projection work together to define both the look and the hand clearance, which matters when matching pulls across different cabinet lines or room layouts. The use of #8-32 thread screws as specified ties the handle to a standard hardware thread, supporting straightforward selection of fasteners compatible with the tapped holes in the pull.
This EPCO Architectural Series aluminum pull has a 160mm hole center to center spacing, so the mounting holes on the door or drawer front align to that dimension.
The AC2130-160-SS handle has a 174mm (6.85 inch) overall length, which affects how much of the cabinet front it spans visually and physically.
The EPCO aluminum pull has a 30mm (1.18 inch) projection, setting the stand-off from the surface and allowing space for fingers behind the pull.
The pull has a 25mm width, which defines the visible bar size on the cabinet front and the contact area for gripping.
The product description specifies #8-32 thread screws, so the handle is tapped for #8-32 fasteners during installation.
This handle is identified by manufacturer part number AC2130-160-SS and by the description Aluminum Handle, 6.85INL, 160MM CC, Steel.
The EPCO Architectural Series aluminum pull with 160mm hole center to center provides clear mounting dimensions for cabinet and casework projects. With its 174mm (6.85 inch) overall length, 25mm width, and 30mm projection, the handle offers defined sizing for layout and grip. The AC2130-160-SS part number and metal construction align it with decorative hardware and moldings work. For projects laid out on a 160mm center to center pattern, this pull supports consistent alignment across doors and drawers.
Sold In: 1 Each