Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Architectural Series aluminum pull gives you a defined 192mm hole center to center layout, so drilling patterns stay consistent from cabinet to cabinet on a run. The 206mm overall length, noted as 8.11 inches, spans wider drawer fronts smoothly and keeps visual lines uniform on doors. A 25mm width provides a solid gripping surface across the hand, so opening heavier drawers remains controlled in everyday use. The 30mm projection, listed as 1.18 inches, stands the pull off the front just enough for fingers to clear the face without feeling bulky on narrow rails. This pull is identified as manufacturer part AC2130-192-SS, which ties directly to the Architectural Series 7-9/16 inch center to center reference for repeat ordering and matching across a project.
The stated 192mm hole center to center dimension drives the mounting layout for this EPCO aluminum pull, giving installers a fixed reference when marking and drilling fronts. With the overall length at 206mm, there is defined material extending beyond each screw point, so the handle visually anchors the installation on both sides of the fasteners. A 30mm projection determines how far the pull stands off the surface, which affects finger clearance on thicker door edges and provides a repeatable offset whenever the same pattern is used on multiple cabinets. The 25mm width sets how much of the pull is available across the hand, helping maintain the same feel whether it is installed on doors or drawers along a run.
This EPCO Architectural Series aluminum pull with a 192mm hole center to center layout suits cabinet and drawer fronts that are designed around metric drilling patterns. The 206mm overall length allows the handle to span medium to wider fronts, which is useful on larger base drawers that need more gripping reach. A 25mm wide profile supports a stable hand position at the center or near the ends, so the same handle can be used across different cabinet sizes without changing user feel. The 30mm projection gives front clearance that is consistent when repeated across a kitchen or casework run, keeping handles aligned away from the face by the same amount on every unit.
The defined 192mm center to center spacing on the AC2130-192-SS aluminum handle helps jigs and drilling templates stay accurate, because the measurement ties directly to the mounting holes. Having a 206mm overall length creates a predictable overhang beyond the screw locations, which simplifies layout when balancing the handle across stile widths or drawer fronts. The 25mm width keeps the gripping surface substantial enough that the handle feels similar on both lighter wall cabinets and heavier base drawers, so users experience the same pull depth and contact area. With a 30mm projection, the pull stands off at a repeatable distance from the face, supporting consistent ergonomics and alignment wherever the same part number is installed in a project.
The EPCO Architectural Series aluminum pull has a 192mm hole center to center dimension, which sets the exact drilling distance between mounting points on cabinet or drawer fronts.
The AC2130-192-SS aluminum handle has an overall length of 206mm, noted as 8.11 inches, so it extends beyond the mounting holes to visually anchor wider doors and drawers.
This 192mm center to center cabinet pull has a 30mm projection, listed as 1.18 inches, which provides finger clearance between the grip and the cabinet face during use.
The EPCO Architectural Series aluminum pull has a 25mm width, giving a defined gripping surface that supports a stable handhold on cabinet doors and drawers.
This EPCO aluminum cabinet pull is identified by manufacturer part number AC2130-192-SS, which links directly to the 192mm center to center and 206mm overall length configuration.
This pull supports metric layouts through its 192mm center to center and 206mm overall length, aligning with metric drilling patterns on cabinets and drawers.
This EPCO Architectural Series aluminum pull pairs a 192mm hole center to center layout with a 206mm overall length, 25mm width, and 30mm projection, so mounting, grip, and front clearance all follow known dimensions. When projects call for a handle that matches this drilling pattern and size range, the AC2130-192-SS part number ties directly to these measurements for straightforward selection across cabinets and drawers.
Sold In: 1 Each