Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO architectural series aluminum pull gives a 128mm center to center mounting layout, which sets consistent hole spacing across doors and drawers so drilling jigs and boring patterns stay repeatable from one cabinet run to the next. The same pull has a 150mm overall length, so it spans wider face frames or door rails while still leaving clear finger access at the ends for a solid grip in daily use. A 25mm width spreads the pull across the surface, which helps it sit visually balanced on standard cabinet stile widths. The 30mm projection stands the handle off the face enough for fingers to wrap behind it, which supports comfortable opening on heavier fronts. As an aluminum bow handle, AC2138-128-SS keeps the profile simple and streamlined, which suits straightforward installation on residential or commercial cabinet projects built around metric spacing.
The 128mm center to center layout on the AC2138-128-SS aluminum bow handle provides a known drilling dimension, which allows installers to set up templates or boring machines once and run a full job without constant re-measuring. With a 150mm overall length tied to that same 128mm spacing, the handle leaves a controlled amount of metal past each screw point, which helps keep the pull centered and balanced on mid-size drawers or doors. The 30mm projection works with the pull width to create a predictable stand-off, which is useful when aligning handles across doors that sit near appliance panels or tall end panels. As part of EPCO decorative handles and pulls, this architectural series piece fits into hardware runs where consistent dimensions keep layout straightforward from shop build through onsite installation.
The EPCO architectural series aluminum pull with 128mm center to center is sized for cabinets planned around metric spacing, which fits projects where doors and drawers are bored on 32mm or similar systems that favor even handle locations. With a 150mm overall length, the pull lands well on common drawer widths, where it covers enough span to look proportional without crowding the edges. The 25mm width makes it suitable for mounting on both narrow and standard stiles, because the handle stays visually balanced without overpowering the rail face. A 30mm projection supports use on fronts that sit near adjacent cabinetry, where the stand-off still allows fingers to grab the bow without interference from neighboring faces or countertops. As a bow handle identified under manufacturer part AC2138-128-SS, it can be matched by part number when repeating a hardware schedule across multiple rooms or phases.
The fixed 128mm center to center measurement on this AC2138-128-SS handle means boring patterns can be standardized, which reduces layout variation and keeps handle lines straight across long cabinet runs. Because the overall length is precisely 150mm, installers know exactly how much handle extends past each mounting point, which helps when centering the pull on rails or aligning it to panel features. The 25mm width ties into that overall length to provide a stable contact area for hands, which can reduce twisting when users pull from one side of the handle. The 30mm projection keeps the grip point away from the door or drawer face, which helps prevent knuckles from brushing the surface during operation and supports comfortable use on taller pantry or utility doors. Being part of EPCO decorative handles and pulls, this aluminum bow handle carries a defined set of dimensions, so drawings and cut lists can reference exact measurements for reliable cabinet hardware planning.
The EPCO architectural series aluminum pull has a 128mm center to center dimension, which sets the screw spacing for drilling and keeps hardware layout consistent across cabinets.
The AC2138-128-SS aluminum bow handle has a 150mm overall length, which helps it span typical cabinet drawer and door widths while staying visually balanced.
This EPCO aluminum pull is 25mm wide with a 30mm projection, which provides a solid grip area and enough stand-off from the cabinet face for comfortable finger clearance.
The AC2138-128-SS is an EPCO architectural series aluminum bow handle, which gives cabinets a simple curved pull style suited to decorative hardware applications.
The 128mm center to center measurement defines the mounting hole spacing, which supports repeatable drilling setups and straight alignment across multiple cabinet fronts.
Manufacturer part AC2138-128-SS identifies this specific EPCO architectural series aluminum pull, which helps match hardware across drawings, orders, and multiple job phases.
The EPCO architectural series aluminum pull AC2138-128-SS combines a 128mm center to center layout, 150mm overall length, 25mm width, and 30mm projection, so cabinet hardware plans can rely on fixed dimensions for drilling, alignment, and everyday grip across residential or commercial cabinet runs.
Sold In: 1 Each