Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Arch Series 128mm pull gives you a steel bow-style handle sized for common cabinet layouts, so you can keep hardware consistent across doors and drawers. The 128 mm center to center dimension sets the distance between mounting screw holes, which helps match existing boring patterns in many cabinet lines. The overall length of 5.98 inches provides hand clearance along the front of the door or drawer while staying proportionate on mid-size fronts. Steel construction creates a solid-feeling grip along the arch, useful on frequently used cabinet positions. The satin black finish delivers a dark, uniform look that blends into many modern and transitional designs. This pull pairs its 128 mm mounting span with a projection of 1-3/16 inches, which sets the standoff from the cabinet face for finger clearance and reduces the chance of knuckles rubbing finished surfaces during daily use.
This satin black steel bow pull uses a 128 mm center to center hole spacing, so mounting starts with two straight, level bores at that distance. The 1-3/16 inch projection sets the working offset from the cabinet face, shaping how your hand approaches the arch and reducing contact with finished fronts as doors or drawers are operated. With an overall length of 5.98 inches, the pull spans a portion of the cabinet front that gives enough leverage for smooth opening without crowding panel details. The 8-32 machine screw thread in 1 inch length aligns with common drilling depths through standard cabinet fronts, helping the pull seat tightly against the face once tightened. Steel construction maintains the shape of the arch during use, which helps keep the pull sitting flat over time after repeated openings.
This EPCO steel cabinet handle fits cabinet and drawer layouts designed around a 128 mm center to center hole pattern, so it works well on systems already bored to that spacing. The satin black finish supports projects where a dark, understated pull is preferred across decorative hardware and moldings. With its 5.98 inch overall length, the handle sits comfortably on many kitchen and bath cabinet doors or mid-width drawers without overpowering the front. The 1-3/16 inch projection gives enough room for fingers behind the bow on standard cabinet door thicknesses, so the handle remains practical on frequently used positions. Because it is a bow pull, the curved profile provides an approachable grip from different angles, which suits cabinets placed at various heights in a run.
The 128 mm center to center measurement on this EPCO Arch Series pull standardizes layout for rows of hardware, which helps installers keep handles aligned across multiple cabinets without recalculating spacing. Its 5.98 inch overall length gives a fixed outer dimension, making it easier to center the handle visually relative to door stiles or drawer fronts. The 1-3/16 inch projection sets a predictable standoff, so installers can anticipate how far the pull will extend into adjacent spaces when planning clearances. The 8-32 machine screw thread size in 1 inch length ties into widely used cabinet hardware fastener sizing, so installers can work within a familiar drilling and tightening routine. Steel construction keeps the pull rigid as screws are tightened, helping the ends draw snugly to the surface for a clean fit line at each mounting point.
The AP128-BL pull has an overall length of 5.98 inches, a 128 mm center to center hole spacing, and a projection of 1-3/16 inches, which together define its fit and hand clearance on cabinet fronts.
The 128 mm center to center spacing sets a precise distance between mounting holes, so installers can use consistent drilling measurements and maintain straight, uniform alignment across multiple cabinet doors and drawers.
This EPCO pull uses an 8-32 machine screw thread in a 1 inch length, which works with common cabinet hardware drilling patterns and helps draw the steel bow pull firmly to the cabinet face.
The 1-3/16 inch projection sets how far the pull stands off the cabinet face, affecting finger clearance behind the handle and how much the hardware extends into surrounding space.
Steel construction gives the bow pull a rigid body, helping it resist flexing as doors and drawers are operated and keeping the ends seated flat against the cabinet surface.
The satin black finish provides a dark, even appearance on the pull, allowing it to coordinate with other satin black decorative hardware elements in kitchen, bath, or shop installations.
The EPCO Arch Series 5-1/16 inch cabinet pull with 128 mm center to center spacing matches layouts built around that common drilling pattern, giving you a direct fit dimensionally. Its 5.98 inch overall length and 1-3/16 inch projection balance grip comfort with a controlled footprint on doors and drawers. Steel construction and satin black finish work together to support both daily use and visual consistency across decorative hardware runs. When a project calls for a satin black steel bow pull with 128 mm mounting spacing and 8-32 machine screw threads in 1 inch length, this AP128-BL model provides those specific, documented details.
Sold In: 1 Each