EPCO Architectural Series stainless steel pull provides a 96mm center to center mounting span that lines up with many standard drill patterns, so installers can set consistent handle spacing across cabinet runs. The stainless steel construction forms a solid pull point on doors and drawers, giving users a firm grip where frequent opening and closing are expected. An overall length of 108mm keeps the handle compact on smaller cabinet fronts while still projecting enough length for comfortable finger clearance during use. The 4.25 inch length described in the product data matches this overall size, so layout planning can reference either metric or imperial measurements on shop drawings. As a handle and pull in EPCO's decorative hardware and moldings category, this piece serves as the visible operating hardware on finished casework, tying function and appearance together in one component.
The 96mm center to center measurement defines the exact drilling distance for this handle, allowing jigs or templates to be set to that span for faster cabinet door and drawer preparation. With an overall length of 108mm, installers can gauge how close the pull will sit to adjacent edges, helping place it consistently relative to door rails or drawer tops. The stainless steel handle designation indicates a metal body, so hole placement focuses on alignment rather than accommodating flexible components. The 4.25 inch length reference in the product information mirrors the metric sizing, supporting layout work on drawings, cut lists, and job documents that rely on imperial dimensions.
As part of EPCO's handles and pulls product class, this Architectural Series item is intended for use on cabinet fronts where a defined grip point is needed. The 96mm center to center spacing suits applications that follow that specific drill pattern, so shops standardizing on 96mm layouts can drop this pull into existing programs. Its stainless steel construction supports frequent hand contact on doors and drawers, matching typical use in kitchens, offices, or built-in casework where users operate the same fronts repeatedly. The 108mm overall length keeps the pull visually balanced on many door and drawer widths, allowing designers to align it with other hardware choices in the same project.
The defined 96mm center to center dimension helps reduce rework by giving installers a fixed mounting span to follow from piece to piece. When drilling doors and drawers in batches, that single measurement keeps pulls level and aligned across stacked fronts. The 108mm overall length adds another predictable reference point, helping crews position the handle so it neither crowds the edge nor appears undersized on the face. Calling out the handle as stainless steel clarifies that the pull presents a uniform metal surface for the user, which can simplify matching finishes within EPCO decorative hardware lines. With the 4.25 inch length detail echoing the metric information, project documents can communicate measurements clearly to teams that work in either system while still referring to the same physical part.
The EPCO Architectural Series stainless steel pull has a 96mm center to center mounting span, which sets the distance between the two mounting holes for cabinet doors and drawers.
The AS51-096-SS stainless steel handle has an overall length of 108mm, described as 4.25 inches, which defines the visible size of the pull on the cabinet front.
This pull belongs to the handles and pulls product class within decorative hardware and moldings, indicating its role as the operating handle on cabinet doors and drawers.
The 96mm center to center dimension provides a fixed drilling distance, allowing installers to use templates or jigs for consistent, repeatable hole placement across cabinets.
The stainless steel handle description indicates the pull is made as a stainless steel piece, creating a solid metal grip for users operating cabinet doors or drawers.
This EPCO pull is identified by manufacturer part number AS51-096-SS and by the SAP description STAINLESS STEEL HANDLE,4.25INL,96MM CC for accurate product selection.
The EPCO Architectural Series stainless steel pull with 96mm center to center and 108mm overall length offers defined dimensions for cabinet hardware planning. By using the AS51-096-SS part, installers align drill patterns, grip feel, and visual scale with the documented measurements, helping projects stay consistent from shop drawings through final cabinet installation.
Sold In: 1 Each