Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO bar pull 320mm center to center gives cabinets a straight, modern grip that spans wider drawer and door faces, so hands land naturally on the handle. The overall length of 400mm stretches across more of the front, which helps visually line up multiple fronts in a run. A 320mm center-to-center drilling pattern sets clear hole spacing, which supports repeatable layout in shop jigs and CNC programs. The 35mm projection pulls the hand away from the face enough to clear typical front thicknesses, which helps reduce knuckle contact when opening. A 12mm bar diameter creates a solid-feeling handhold that stays easy to grab from different angles. The satin nickel finish on this pull matches projects calling for a brushed, low-gloss metal look, which helps tie together appliances, hinges, and other visible hardware along the same line.
The 320mm center to center dimension on this EPCO bar pull defines the distance between mounting points, which lets installers drill a simple straight line of holes for consistent alignment across a bank of fronts. A 400mm overall length means the bar extends past the mounting points at both ends, which creates even overhangs that can be lined up visually from cabinet to cabinet. With a 35mm projection, the pull stands off the surface enough to clear fingers when pulling doors open, which is important when fronts sit near adjacent walls or appliances. The 12mm bar diameter keeps the profile substantial without feeling bulky, which supports clean lines while still offering a full grip on heavier or taller doors.
This EPCO Bar Pull Series handle with 320mm center to center sizing fits cabinet and drawer layouts designed around longer pulls, which is common on wide kitchen drawers and pantry doors. The 400mm overall length supports use on larger faces where shorter pulls might look undersized, which helps maintain proportion on tall fronts. Its 35mm projection works with typical cabinet door and drawer thicknesses, which keeps the hand clear when opening without pushing too far into walkways. The 12mm bar diameter pairs well with other robust handles in the same line, which helps keep a consistent grip feel throughout a room. With a satin nickel finish specified, this pull fits designs that call for matching satin nickel decorative hardware and moldings.
The defined 320mm center to center drilling dimension on the EPCO BP320-SN bar pull lets installers build jigs and templates around a fixed spread, which speeds repeat drilling on multiple cabinet runs. A 400mm overall length makes it easy to reference edge clearances at both ends, which supports lining up pulls symmetrically on stacked drawers. The 35mm projection means the bar stands off a predictable distance from the face, which helps when aligning pulls across doors near each other so they present the same stand-off line. The 12mm bar diameter gives a consistent cylindrical profile, which allows installers to visually match this pull to other 12mm bar pulls on adjacent cabinets. The satin nickel finish keeps the surface appearance uniform along the full 400mm length, which matters when the handle spans a wide visual area on tall or wide cabinet fronts.
The EPCO BP320-SN bar pull has a 320mm center to center measurement, which sets the exact drilling distance between mounting holes for consistent cabinet layouts.
The EPCO BP320-SN bar pull has a 400mm overall length, which lets it span wider cabinet doors and drawers for a balanced look across broader fronts.
The bar pull projects 35mm from the cabinet surface, which provides practical finger clearance behind the handle when opening doors and drawers.
This EPCO bar pull uses a 12mm bar diameter, which creates a solid gripping surface that feels substantial on frequently used cabinet fronts.
The BP320-SN bar pull is specified in satin nickel, which aligns with satin nickel decorative hardware and moldings in coordinated cabinet installations.
The bar pull uses #8 x 32 x 1 steel screws, which thread into standard pull locations on cabinet doors and drawers for secure mounting.
The EPCO BP320-SN bar pull combines a 320mm center to center drilling pattern with a 400mm overall length, which suits wide drawers and doors that call for longer handles. A 35mm projection and 12mm bar diameter set predictable clearances and grip size, which helps standardize layouts on runs of cabinets. The satin nickel finish aligns with projects built around satin nickel decorative hardware and moldings, which supports consistent visual results across the job. For cabinet work needing a longer bar-style handle with fixed dimensions, this EPCO satin nickel bar pull matches that role.
Sold In: 1 Each