EPCO recessed pull provides a low-profile grip by sitting inside a cutout instead of on the surface, which keeps fronts smooth where a flush look or tight clearances are needed. The 2-7/8 inch center-to-center dimension sets the exact screw spacing, so matching existing boring layouts on cabinets or panels is straightforward. Overall length of 3-19/32 inches defines the visible footprint on the face, letting layouts stay consistent across multiple doors or drawers. Its gray color establishes a neutral, understated appearance that suits functional installations where visual distraction needs to stay minimal. The plastic construction determines both feel and weight, which can be beneficial on lighter doors or drawer fronts. By mounting into a routed opening, this pull supports applications where projecting hardware could interfere with sliding, stacking, or adjacent components.
The specified 3-1/8 inch by 1-1/4 inch hole size defines the opening this gray recessed pull requires, which lets installers set up router templates or jigs ahead of time. A 7/16 inch depth for the recess gives a clear target when plunging or step-drilling, so the pull sits properly without over-cutting the panel. With 2-7/8 inches center-to-center between mounting points, drill locations can be laid out reliably on either side of the cutout. The 9/16 inch projection then describes how far the pull will stand proud, which is important when confirming clearance around overlapping doors or sliding elements. Overall, these dimensions work together to support predictable layout, machining, and final alignment on cabinetry or similar casework.
The gray recessed pull with 3-19/32 inch length works well wherever a compact hand grip is needed without adding bulk to the surface, such as on cabinet doors or drawer fronts in tight runs. Because it mounts into a 3-1/8 inch by 1-1/4 inch by 7/16 inch hole, it suits projects where a machined cutout is part of the build process, like custom cabinetry or shop-built casework. The 2-7/8 inch center-to-center spacing aligns with the pull body, so the visual opening and the mechanical connection share the same compact footprint. A 9/16 inch projection keeps the grip shallow, which helps when doors need to swing close to adjacent frames or equipment without hardware clashing. The plastic construction also supports use on lighter or thinner fronts where a heavier metal pull might feel disproportionate to the panel.
The defined 3-1/8 by 1-1/4 inch cutout simplifies template design, letting installers repeat the same routed pocket across multiple doors or drawers with consistent results. The 7/16 inch depth combines with that footprint to create a stable cavity, so the pull seats squarely and resists twisting in regular use. With the 2-7/8 inch center-to-center dimension, boring for fasteners can be standardized along a run, which speeds drilling and reduces layout time on repetitive jobs. The total length of 3-19/32 inches gives a visual reference when aligning the pull to rail edges, stile lines, or drawer centers, supporting balanced sight lines. The 9/16 inch projection then sets a predictable low profile that helps plan clearances in installations with overlapping doors, sliding panels, or nearby hardware. Together, these EPCO DP1710-G dimensions give tradespeople a repeatable pattern that matches cutout, mounting, and final appearance.
The EPCO recessed pull has a 3-19/32 inch overall length, 2-7/8 inch center-to-center spacing, and 9/16 inch projection, which together define its footprint and how it sits on a cabinet front.
The gray recessed pull mounts into a 3-1/8 inch by 1-1/4 inch hole with a 7/16 inch depth, which sets the routing or drilling dimensions for installing it into a panel.
The 2-7/8 inch center-to-center spacing establishes fixed mounting hole locations, which supports accurate drilling and allows consistent alignment across multiple doors or drawers.
The 9/16 inch projection limits how far the pull extends from the surface, which helps maintain clearance in tight spaces or where doors swing near adjacent components.
The EPCO DP1710-G recessed pull is made of plastic, which influences its weight, feel in hand, and interaction with lighter cabinet or panel constructions.
The 3-19/32 inch length defines the visible width of the pull, which helps position it consistently relative to stiles, rails, and drawer edges for uniform layouts.
The EPCO recessed pull DP1710-G pairs a 2-7/8 inch center-to-center dimension with a 3-1/8 inch by 1-1/4 inch by 7/16 inch cutout, giving clear machining targets for cabinet work. Its 3-19/32 inch length and 9/16 inch projection establish a compact, gray, plastic grip suited to low-profile fronts. For projects built around routed recesses and repeatable mounting patterns, this recessed pull offers defined measurements that support efficient layout and consistent cabinet hardware placement.
Sold In: 1 Each