Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP403-BL tab pull provides a low-profile grip for cabinet fronts using a 1-7/8 inch center to center mounting pattern, which sets consistent handle spacing across doors and drawers for a uniform layout on jobs. The pull uses an overall 3-7/8 inch length, giving a compact modern look that fits narrow drawer fronts while still offering practical finger access. An anodized satin black finish delivers a dark, matte appearance, supporting contemporary cabinet designs where hardware should stay visually quiet. Aluminum construction keeps each pull lightweight, which is helpful on large banks of drawers where hardware count is high. The top mounting design positions the pull over the edge of the panel, allowing an accessible lip without needing a protruding handle body. This pull is classified under handles and pulls in decorative hardware, giving it a defined role wherever straightforward cabinet operation and consistent alignment matter.
The EPCO 1-7/8 inch center to center anodized satin black tab pull is designed for top mounting, so it anchors from the cabinet face side and wraps the top edge of the panel for finger access. This layout keeps the hardware tight to the surface, which is useful when fronts are near adjacent walls or appliance panels. The pull suits material thickness of 5/8 to 7/8 inch, matching common cabinet door and drawer stock so the tab section engages the edge correctly. That thickness range supports both lighter shop-built fronts and many factory panels, helping maintain a consistent feel across mixed installations. With a 3-7/8 inch length, the pull spans enough width on the front to give a stable grip point while staying compact, which matters on narrow drawer banks.
This aluminum drawer pull DP403-BL works wherever a slim, top-mounted grip is preferred on cabinet doors or drawers made from 5/8 to 7/8 inch material. The center to center: 1-7/8 inch spacing keeps the pull small enough for tight drawer stacks yet still functional on wider fronts, so a single spec can run through multiple cabinet sizes. The 3-7/8 inch length gives a visible edge along the top of the front, creating a continuous line when several pulls are aligned in a row. An anodized satin black finish helps the part sit visually flush against dark painted or stained fronts and provides a defined contrast on light-colored panels, which is useful when hardware needs to read as a subtle design element. As part of the handles and pulls class from EPCO, this style suits projects where a streamlined tab look is needed instead of larger projecting handles.
The 1-7/8 inch center to center measurement on this EPCO aluminum cabinet pull sets a precise hole pattern, which helps drilling fixtures stay aligned and reduces layout time across repetitive cabinet runs. By using a defined center spacing, installers can standardize one drill guide for every DP403-BL pull on the job. The design for 5/8 to 7/8 inch material thickness ensures the tab rests correctly over the front edge, which keeps the gripping surface in the same relative position from door to door. Top mounting places the pulling force directly near the edge, aiding smooth door and drawer operation because the hand engages close to the opening pivot or slide path. The aluminum construction keeps mass low at each mounting point, which is helpful on lighter fronts where minimizing added weight supports long-term hardware performance. The anodized satin black surface offers a consistent appearance across multiple pulls, so parallel runs of cabinets carry a uniform finish line.
The EPCO DP403-BL tab pull has a center to center: 1-7/8 inch dimension, which sets the drilling distance between mounting points for consistent hardware spacing.
The aluminum drawer pull DP403-BL has a 3-7/8 inch length, giving a compact footprint that suits narrow drawer fronts and closely spaced cabinet layouts.
The EPCO DP403-BL tab pull has an anodized satin black finish, providing a dark, matte look that supports contemporary cabinet designs.
This black tab pull for drawers is designed for material thickness of 5/8 to 7/8 inch, so it seats properly over typical cabinet doors and drawer fronts.
The EPCO DP403-BL uses a top mounting design, positioning the pull over the panel edge so the grip sits where hands naturally reach.
The DP403-BL tab pull is aluminum, which keeps each pull lightweight while still providing a solid feel on cabinet doors and drawers.
The EPCO DP403-BL tab pull combines a 1-7/8 inch center to center layout with a 3-7/8 inch length, making it a practical choice when one pattern must work across doors and drawers. Its anodized satin black finish and aluminum construction support projects aiming for a modern, low-profile hardware line. With design for 5/8 to 7/8 inch material thickness and a top mounting style, it fits standard cabinet fronts while keeping the grip close to the edge. Use this aluminum drawer pull DP403-BL wherever a consistent, compact tab handle is needed across a full run of cabinetry.
Sold In: 1 Each