Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP403-BZ tab pull is an aluminum drawer pull designed to give a low-profile grip on cabinet fronts. Its 1-7/8 inch (48 mm) center to center spacing sets the mounting points, which helps in laying out consistent hole locations across a run of doors or drawers. The overall 3-7/8 inch length provides a wider grasping area than the fastener spacing alone, which supports a more comfortable pull point on smaller cabinet faces. An anodized satin bronze finish defines the surface color and sheen, so installers can match this pull to bronze-toned hinges or other decorative hardware on the same project. The pull is built from aluminum, which keeps the component light while offering a solid metal feel during everyday use. This combination of defined dimensions, specific finish, and material gives installers a clear fit profile for planning cabinet hardware layouts.
The EPCO DP403-BZ tab pull uses a top mounting design, meaning it attaches over the top edge of the door or drawer front. This configuration allows the front edge to act as a physical reference, which supports straight, repeatable alignment across multiple openings. The pull is specified for material thickness from 5/8 inch to 7/8 inch, tying its fit to common cabinet panel sizes used in many shop-built and manufactured boxes. Working within this thickness range helps the mounting geometry sit correctly at the edge, so the gripping lip presents a consistent reveal. Because the center to center spacing is fixed at 1-7/8 inch, installers can build a single drilling pattern that matches this pull, reducing layout time on larger projects.
The EPCO DP403-BZ tab pull is part of the decorative hardware and moldings category under handles and pulls, which positions it for use on cabinet doors and drawers rather than structural applications. With a 1-7/8 inch center to center dimension, it suits smaller fronts where compact hardware is preferred, such as vanity drawers, upper cabinets, or narrow pull-out sections. The specified material thickness range of 5/8 inch to 7/8 inch aligns with typical cabinet-grade panels, supporting use on both face-frame and frameless fronts that fall within this band. Its anodized satin bronze finish allows it to visually coordinate with other satin bronze cabinet pulls, hinges, or knobs in the same space, which helps maintain a unified appearance on multi-room or whole-kitchen jobs. Aluminum construction means the pull stays light on the edge of the door or drawer front, which can be especially useful on smaller, lightweight panels where heavier hardware might feel out of scale.
The fixed 1-7/8 inch (48 mm) center to center spacing on the EPCO DP403-BZ gives installers a defined drilling dimension, which is valuable for building templates or using boring equipment set up to that distance. The 3-7/8 inch overall length extends beyond those mounting points, providing a balanced look once installed and offering a wider finger grip zone for everyday operation. Its top mounting layout means the hardware references directly off the door or drawer edge, which supports straight lines of pulls when working across banks of cabinets. Suitability for material thickness from 5/8 inch to 7/8 inch indicates that, within this range, the pull is intended to sit correctly at the edge, helping the tab projection feel consistent from front to front. The anodized satin bronze finish is defined at the product level, so when multiple DP403-BZ pulls are used in a project, the color and sheen remain coordinated across each opening.
The EPCO DP403-BZ tab pull has a 1-7/8 inch (48 mm) center to center spacing and a 3-7/8 inch overall length, which defines both mounting hole distance and total grip span on the front.
The EPCO DP403-BZ tab pull is intended for material thickness from 5/8 inch to 7/8 inch, so it aligns with common cabinet panel sizes and supports correct edge seating within that range.
The EPCO DP403-BZ tab pull has an anodized satin bronze finish, providing a defined bronze tone and sheen that coordinates with other satin bronze decorative hardware components.
The EPCO DP403-BZ tab pull uses a top mounting design, positioning over the door or drawer edge so the front edge serves as a reference line for consistent alignment.
The EPCO DP403-BZ drawer pull is aluminum, which keeps the hardware lightweight on the front while still providing a metal grip surface during everyday cabinet use.
The 1-7/8 inch center to center spacing on the EPCO DP403-BZ defines a fixed drilling distance, making it straightforward to create templates and repeat accurate mounting across multiple fronts.
The EPCO DP403-BZ tab pull combines a 1-7/8 inch center to center spacing, 3-7/8 inch overall length, and top mounting layout, giving clear geometry for planning cabinet hardware. Its anodized satin bronze finish and aluminum construction set both the appearance and feel, while the 5/8 inch to 7/8 inch material thickness range ties directly to common cabinet fronts. For projects that match these dimensions and finish requirements, this pull offers a defined fit profile for consistent, repeatable layouts across drawers and doors.
Sold In: 1 Each