Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP403-ORB tab pull gives a compact aluminum grip point at the drawer edge, so drawers can be opened with a low-profile pull that stays out of the way on cabinet faces. The 1-7/8 inch center to center dimension sets consistent hole spacing, which keeps layouts uniform across a run of drawers. Its 3-7/8 inch overall length provides a wider grasping area than the screw spacing alone, which helps hands find the pull quickly in regular use. The anodized oil rubbed bronze finish changes bare aluminum into a darker, finished surface, so the pull visually matches oil rubbed bronze hardware in the same project. Being aluminum keeps the pull lightweight, which is useful on smaller drawer fronts where added weight can affect operation. As part of EPCO decorative hardware, this pull fits into handle and pull layouts where a slim tab style is preferred over bulkier projections.
This EPCO aluminum drawer pull is described for top mounting, which positions the pull at the upper edge of the drawer for direct finger access. The top mounting orientation works with the 1-7/8 inch center to center spacing, so holes align along a straight line near that edge. Its sizing matches material thicknesses of 5/8 to 7/8 inch, which means the pull geometry is arranged to sit correctly on standard drawer front stock. Aluminum construction supports this edge mounting because it stays stable even with a relatively thin tab profile. The center to center dimension and top mounting style give installers clear reference points, so pulls can be aligned in rows across base cabinets and casework without layout guesswork.
This EPCO DP403-ORB tab pull is specified for material thickness of 5/8 to 7/8 inch, so it suits common cabinet and drawer front stock used in residential and commercial casework. Matching the pull to this thickness range helps the tab sit correctly over the edge, so the gripping lip is accessible without overhanging too far. The 3-7/8 inch length spreads the pull across more of the drawer width, which can visually balance fronts in standard base and wall cabinets. Because it belongs to the handles and pulls category, this part is oriented toward everyday opening and closing cycles where a secure finger catch is needed at the drawer top. Using an anodized oil rubbed bronze surface on aluminum lets the pull coordinate with other decorative hardware finishes around the same work area, which matters when tying together doors, drawers, and moldings in one project.
The 1-7/8 inch center to center dimension on the EPCO aluminum drawer pull sets a fixed span between mounting points, which is ideal for template drilling and production runs where repeatability controls labor time. Since the pull is top mounting, installers can work from the drawer top down a measured distance, using the same reference across an entire bank of cabinets. The aluminum body keeps the pull relatively light compared to many solid metal options, which helps maintain smooth drawer slides because less added weight is carried by the hardware. The anodized oil rubbed bronze finish treats the surface uniformly, so color appearance is consistent from pull to pull under typical shop and site lighting. As an EPCO decorative hardware and moldings component, this part integrates into broader hardware schedules where matching pulls and handles contribute to a unified cabinet layout.
The EPCO DP403-ORB tab pull has a 1-7/8 inch center to center screw spacing and an overall length of 3-7/8 inch, which sets both drilling layout and visual width on the drawer front.
The 1-7/8 inch center to center spacing gives a fixed distance between mounting holes, so drilling jigs or measured layouts can be reused consistently across multiple drawers.
The DP403-ORB drawer pull is aluminum, so it offers a rigid grip with relatively low weight, which suits lighter cabinet fronts and routine drawer operation.
The EPCO DP403-ORB tab pull has an anodized oil rubbed bronze finish, giving the aluminum a darker, bronze-toned appearance that coordinates with similar decorative hardware.
This EPCO tab pull is intended for material thickness of 5/8 to 7/8 inch, matching typical cabinet and drawer front stock so the pull seats properly on the edge.
The EPCO DP403-ORB tab pull is a top mounting pull, positioning the grip along the upper edge of the drawer where fingers naturally reach during opening.
The EPCO DP403-ORB tab pull combines a 1-7/8 inch center to center layout, 3-7/8 inch length, and aluminum construction with an anodized oil rubbed bronze finish, so it suits edge mounting on 5/8 to 7/8 inch drawer fronts. These defined dimensions and material details let hardware planners match pulls across cabinets with consistent spacing and appearance. For projects where a slim top mounting pull aligns with the overall hardware plan, this EPCO aluminum tab pull provides the specific sizing and finish needed to keep drawer fronts functional and visually coordinated.
Sold In: 1 Each