EPCO Edge Series tab pull gives you a low-profile way to open doors and drawers while keeping a clean front face. The 1-7/8 inch center to center dimension sets precise drilling points, so hole layout stays consistent across a run of cabinets. The overall 3-7/8 inch length spreads the pull point across more of the door or drawer edge, which helps feel solid in use. An anodized satin black finish provides a uniform dark tone, so pulls visually blend across multiple fronts. The aluminum construction keeps weight down while still giving a firmly defined grip edge. Back mounted installation hides visible fasteners from the front, supporting a minimal look on modern projects. The EPCO branding and DP40-BL part number tie this pull to a defined product line, which helps standardize hardware choices across jobs.
This EPCO Edge Series tab pull is back mounted, so it fastens from the rear face of the door or drawer into the pull. The 1-7/8 inch center to center spacing defines the distance between the two mounting points, which guides drilling and jig setup. With a length of 3-7/8 inches, the pull spans enough of the edge to give a comfortable finger grip while staying compact. It is designed for material thickness from 1/2 inch to 7/8 inch, so it works across typical cabinet doors, drawer fronts, and panels within that range. The two #6 x 5/8 inch screws match the back mounted design, tying the pull securely to the substrate.
This EPCO Edge Series tab pull fits cabinet doors and drawers that use 1/2 inch to 7/8 inch thick material, which covers many kitchen, bath, and built-in projects. The 1-7/8 inch center to center dimension suits smaller to mid-size fronts where a compact pull is preferred. Its 3-7/8 inch length keeps the hardware near the edge, which is helpful on narrow rails and reduced-height drawers. The anodized satin black finish supports use on dark painted or stained fronts where a subtle but defined pull is desired. Because the pull is back mounted, it is suited to slab or flat-panel fronts where uninterrupted face grain or color is important. The EPCO product class of handles and pulls places this item among decorative hardware pieces used to finish visible cabinetry.
The defined 1-7/8 inch (48 mm) center to center spacing on this tab pull supports repeatable drilling when using templates or boring equipment. The 3-7/8 inch overall length gives installers a known edge footprint, which simplifies determining clearance between adjacent fronts. Design for 1/2 inch to 7/8 inch material thickness narrows the working range, so screw engagement depth can be planned around common cabinet stock. The back mounted configuration means layout is done from the rear, which can streamline production work where fronts are processed before finishing. The provided #6 x 5/8 inch screws are sized around this thickness range, helping fasten the aluminum pull securely without projecting through the front face. The EPCO DP40-BL designation groups this pull with matching Edge Series components, which can simplify reorders on repeat jobs.
The EPCO DP40-BL tab pull has a 1-7/8 inch center to center dimension, which sets consistent drilling locations for mounting holes across cabinets.
The tab pull length is 3-7/8 inches, giving a compact footprint that still provides a defined grip edge along the cabinet or drawer front.
This EPCO tab pull is designed for material thickness from 1/2 inch to 7/8 inch, matching many standard cabinet doors and drawer fronts.
The EPCO DP40-BL is back mounted, with screws driven from the rear face into the pull, leaving the cabinet front free of exposed fasteners.
The tab pull has an anodized satin black finish, offering a uniform dark appearance suited to contemporary cabinet and furniture designs.
This EPCO tab pull uses two #6 x 5/8 inch screws, which match the back mounted design and the specified 1/2 inch to 7/8 inch material thickness range.
The EPCO Edge Series tab pull DP40-BL combines a 1-7/8 inch center to center layout, 3-7/8 inch overall length, and back mounted installation to support clean cabinet faces. The anodized satin black aluminum body suits projects using 1/2 inch to 7/8 inch thick material. For work that needs a compact, edge-mounted pull tied to a clear EPCO part number, this handle offers a straightforward option for consistent layouts across multiple cabinets.
Sold In: 1 Each