Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center tab pull provides a defined 3 inch screw hole spacing that sets a predictable layout line across doors and drawers, which helps keep handle runs straight on cabinetry jobs. The overall 3-7/8 inch length gives a little extra metal beyond the fasteners, which supports a solid feel at the edge of the panel. An anodized satin brass finish delivers a consistent brass tone with a muted sheen, which fits decorative hardware projects calling for satin brass color. The tab pull design mounts flush in a mortise, so the pull edge sits into the door or drawer front, which supports a low-profile look on modern or minimalist cabinets. Designed for material thickness of 13/16 inch, this pull matches common cabinet door and drawer front stock, which simplifies choosing the correct model during layout.
The flush mortise mounting on this EPCO 3 inch center to center tab pull requires a routed pocket so the body of the pull sits into the material, which results in a slim, integrated look at the cabinet edge. Because the pull is designed for 13/16 inch material thickness, the geometry suits doors and drawer fronts in that range, which supports proper seating of the pull body without overhanging the inside face. The 3 inch center to center spacing defines the distance between mounting holes, which works well with drilling templates and helps maintain alignment from cabinet to cabinet. Matching the 3-7/8 inch overall length during layout helps when spacing pulls on varying drawer widths, so lines stay consistent across a run of cabinets.
This EPCO 3 inch center to center tab pull acts as a compact edge grip for cabinet doors and drawers, which suits installations where a full-length handle would feel oversized. The 3 inch fastener spacing gives installers and shop teams a familiar dimension that aligns with common cabinet drilling standards, which helps coordinate this pull with other 3 inch center to center hardware on the same job. With a 3-7/8 inch overall length, the pull provides a defined grasp area while still fitting on narrower fronts, which is useful on smaller vanity doors or upper cabinets where space is tighter. The anodized satin brass finish presents a satin brass color suited to decorative hardware and moldings applications, which lets this pull function as both a working grip and a visual accent within satin brass schemes.
The flush mortise mounting design means the body of the tab pull nests in a routed recess, which keeps the external projection lower than a surface-mounted pull and can reduce snag points in busy traffic lanes. Because this pull is specified for 13/16 inch material thickness, its proportions are tailored to that panel depth, which supports proper grip access at the edge without extending too far toward the cabinet interior. The defined 3 inch center to center spacing and 3-7/8 inch overall length give consistent reference points for shop drawings and CNC programs, which helps align hardware cuts with cabinet part machining. Using a pull that combines mortise mounting, a known material thickness range, and a fixed 3 inch layout helps maintain uniformity across a full run of cabinets, which supports clean sightlines and repeatable results on finished installations.
The EPCO 3 inch center to center tab pull has mounting holes spaced 3 inches apart, which helps align drilling and keeps hardware spacing consistent across multiple cabinet fronts.
The 3-7/8 inch overall length gives this satin brass tab pull a compact footprint, which fits well on narrow doors or drawers while still providing a defined grip area at the edge.
The EPCO DP412-2-B tab pull is designed for 13/16 inch material thickness, which matches common cabinet door and drawer front stock used in many casework projects.
The flush mortise mounting lets the pull sit in a recessed pocket, which lowers its projection and creates a cleaner, integrated look on cabinet edges.
The EPCO DP412-2-B tab pull has an anodized satin brass finish, which provides a consistent satin brass appearance suited to matching satin brass cabinet hardware.
This EPCO satin brass tab pull is used on cabinet doors and drawers in decorative hardware and moldings projects where a low profile, 3 inch center to center pull is needed.
The EPCO 3 inch center to center tab pull pairs a 3 inch mounting span with a 3-7/8 inch overall length, which suits cabinet runs built around that standard drilling dimension. The flush mortise mounting and 13/16 inch material design support a clean, integrated edge detail on doors and drawers. The anodized satin brass finish ties into satin brass decorative hardware schemes, which helps keep hardware color consistent across a project. Choosing this DP412-2-B pull aligns cabinet machining, layout, and final appearance around a single, well-defined satin brass tab pull specification.
Sold In: 1 Each