Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center tab pull is an anodized satin bronze cabinet pull that gives you a low-profile grip across a 3 inch (76 mm) hole spread, which suits many standard cabinet and drawer layouts. The 3-7/8 inch overall length extends slightly beyond the mounting points, which offers a defined edge for fingers while keeping the pull compact on narrow fronts. Anodized satin bronze finish creates a consistent color surface on the pull, which supports uniform appearance across multiple doors and drawers in the same run. Tab pull design keeps the hardware concentrated at the top edge of the front, which leaves most of the face clear for clean lines on modern installations. EPCO DP412-2-BZ part numbering connects directly to the manufacturers catalog, which simplifies reordering matching pulls for future cabinet or drawer additions on the same job.
Flush mortise mounting on this EPCO tab pull means the body sits into a cutout, which lets the front edge stay nearly level with the door or drawer surface for a cleaner line at eye level. Design for 13/16 inch material thickness aligns the pull with doors and fronts built from that stock, which helps the mortise depth and screw engagement suit typical cabinet construction. The 3 inch center to center spacing ties the pull to a repeatable drilling pattern, which is useful when running multiple fronts through a boring machine or drill jig. Specified #6 x 5/8 inch screws are sized for the pull and thickness, which supports secure attachment while limiting screw projection beyond the back of 13/16 inch material.
The EPCO DP412-2-BZ tab pull mounts on 3 inch center to center holes, which lets it sit consistently near the edge of cabinet doors or drawers where hands naturally reach. With a 3-7/8 inch overall length, the pull adds a small extension beyond the mounting points, which provides a clear grasping section without overwhelming narrow fronts. Flush mortise mounting sets the pull into the material, which keeps it tight to the surface so doors can move freely near adjacent fronts or walls. Because the pull is designed for 13/16 inch material thickness, the grip sits at a depth that works with that stock, which keeps the hand position comfortable across a run of matching fronts.
The 3 inch center to center measurement on this EPCO 3 inch center to center tab pull aligns with a common standard, which allows installers to use fixed drill guides for repeatable hole placement across multiple cabinets. The 3-7/8 inch length dimension gives a defined reference from edge to hole centers, which helps in setting consistent reveals and distances from door or drawer edges on shop drawings. Anodized satin bronze finish is applied to the pull, which maintains a uniform appearance when several pulls are aligned on a high-visibility elevation. Flush mortise mounting requires a recess, which encourages precise routing or machining so every pull sits at the same depth and angle along a run. The 13/16 inch material thickness design guides selection of fronts at that thickness, which keeps screw penetration and mortise depth in the expected range for steady installations.
The EPCO DP412-2-BZ tab pull has 3 inch center to center mounting and a 3-7/8 inch overall length, which sets a compact footprint suitable for doors and drawers.
The flush mortise mounting sets the pull into a recess, which keeps the front surface low profile and supports tight reveals between adjacent doors or drawers.
This EPCO bronze tab pull is designed for 13/16 inch material thickness, which matches common cabinet door and drawer front construction.
The tab pull has an anodized satin bronze finish, which provides a consistent bronze tone that coordinates with satin bronze decorative hardware.
The 3 inch center to center spacing matches a common drilling pattern, which works well with boring jigs or templates for repeat installations.
This EPCO DP412-2-BZ pull is specified with #6 x 5/8 inch screws, which suit the pull design and the 13/16 inch cabinet material thickness.
This EPCO 3 inch center to center tab pull combines 3 inch mounting, 3-7/8 inch overall length, and anodized satin bronze finish, which fits projects built around common cabinet drilling patterns in that color family. Flush mortise mounting and 13/16 inch material design align the pull with typical cabinet door and drawer construction, which supports consistent grip position across a full installation. At Wurth Baer Supply, this DP412-2-BZ pull is offered for jobs that need repeatable, satin bronze tab hardware across multiple cabinet fronts.
Sold In: 1 Each