Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 72 inch aluminum tab pull gives you a continuous 6 foot grip along a door or drawer edge, so longer cabinet runs use one clean, uninterrupted pull instead of multiple shorter pieces. The flush mortise mounting lets the pull sit into the edge, which keeps the hardware low profile while still providing a defined lip to grab, useful on modern flat-front panels. Designed for 3/4 inch material thickness, this profile matches common cabinet stock, so the mortise depth and engagement suit typical shop-built doors and drawers. The no holes and no screws design in the pull means the installer handles fastening through the mortise location, which keeps the face of the pull visually clean. The unfinished aluminum construction gives a bare metal surface that can align with raw aluminum looks or shop finishing processes.
The flush mortise mounting described for this EPCO 72 inch aluminum tab pull means the installer cuts a recess so the pull nests into the 3/4 inch material edge, creating an integrated look along the cabinet line. Working with 3/4 inch material thickness as specified, the installer can size the mortise to hold the pull while maintaining adequate remaining material, which matters on narrower rails and stiles. Because the pull has no holes and no screws in its body, fastener planning centers on the mortised area, which keeps the exterior surfaces uninterrupted. The 6 foot length also influences handling during installation, since supporting the full profile during mortising and fitting helps keep the pull aligned with the workpiece edge.
This EPCO DP412-L-M tab pull, at 72 inches long, suits applications where a single handle runs most of the door or drawer length, such as tall indoor cabinet doors or wide drawer banks that match the 6 foot span. The design for 3/4 inch material thickness fits many cabinet doors, drawer fronts, and panel edges that follow standard shop dimensions, so the same pull style can extend across multiple openings in a run. Flush mortise mounting works on edges where the material can accept a recess without crowding adjacent components, making it appropriate on frameless cabinet systems or overlay applications with sufficient edge width. The indoor designation in the description aligns this aluminum pull with interior projects, where the environment corresponds to typical residential or commercial room conditions. Because the pull has no holes and no screws in its body, the visual result stays consistent along long edges, which supports continuous linear design elements.
The specified no holes and no screws configuration on this 6 foot aluminum tab pull means the front and grip surfaces remain clear of visible fasteners, so repeated installations along a cabinet wall present uniform lines without screw head interruption. The flush mortise mounting further reinforces consistency because each pull references a routed or machined pocket, letting installers use the same layout across multiple 3/4 inch thick components. Matching the pull to 3/4 inch material thickness simplifies repeat work on standard cabinet parts, since mortise depth and edge reveal can be duplicated with a single setup. The unfinished aluminum surface maintains a single material tone along the entire 72 inch length, which supports projects that rely on metal contrast against wood or laminate fronts. As part of the handles and pulls class from EPCO, this DP412-L-M profile fits into decorative hardware and moldings planning where linear pulls set the visual direction of the installation.
The EPCO DP412-L-M aluminum tab pull has a length of 72 inches, giving a 6 foot continuous grip that can span tall doors or wide drawers in one piece.
The DP412-L-M pull uses flush mortise mounting, so it sits into a machined recess in the edge, creating a low-profile integrated handle along the cabinet component.
The EPCO 72 inch aluminum tab pull is specified for 3/4 inch material thickness, matching common cabinet doors and drawer fronts for straightforward mortise depth planning.
The description notes 3/4INDOOR, indicating this DP412-L-M aluminum tab pull is oriented toward indoor cabinet and furniture applications rather than exterior use.
The DP412-L-M tab pull is described as having no holes and no screws, so the pull body remains free of face-mounted hole details for a cleaner appearance.
This EPCO 72 inch aluminum tab pull is described as unfinished, providing a plain aluminum surface that shows the base metal without applied color.
The EPCO 72 inch aluminum tab pull DP412-L-M combines 6 foot length, flush mortise mounting, and design for 3/4 inch indoor material, giving cabinet shops a continuous pull option that aligns with standard door and drawer construction. The no holes and no screws pull body keeps the visible edge clean, which benefits modern, linear layouts where hardware lines define the look. The unfinished aluminum matches projects that call for plain metal contrast with wood or composite panels. For long indoor cabinet runs or tall fronts needing a single uninterrupted grip, this EPCO tab pull provides a hardware solution that fits directly into decorative hardware and moldings planning.
Sold In: 1 Each