Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center tab pull provides a compact gripping point across a 3 inch mounting span, which organizes the drill layout and keeps multiple fronts visually aligned on cabinet runs. The 3-7/8 inch overall length extends slightly beyond the mounting holes, giving a defined lip area that fingers can catch comfortably along the drawer or door edge. An anodized oil rubbed bronze finish presents a dark metallic surface that visually matches oil rubbed bronze design schemes while delivering a consistent appearance across multiple pulls. The tab pull design works as a low-profile handle, keeping projection minimal while still offering edge access to open doors and drawers. As part of the EPCO decorative hardware and moldings handles and pulls class, this pull integrates into cabinet hardware layouts where a streamlined, modern tab profile is preferred.
The flush mortise mounting requirement means the pull is designed to be set into a routed pocket, letting the body of the EPCO DP412-ORB tab pull sit close to flush with the face of the cabinet. This installation style reduces projection off the surface, which keeps fronts cleaner and helps avoid snag points along tight walkways or stacked drawer banks. Because the pull is specified for 3/4 inch material thickness, the mortise and screw path align with standard cabinet door and drawer front dimensions, giving dependable thread engagement for the #6 x 5/8 inch screws in typical shop-built or factory fronts. The 3 inch center to center spacing combines with this mortise approach so installers can use consistent jig settings for both routing and drilling across the entire project.
This EPCO 3 inch center to center tab pull is positioned to work along the edges of cabinet doors and drawers where a recessed grip is preferred. With a length of 3-7/8 inches, the pull presents a defined horizontal segment that sits near the top or side edge of 3/4 inch fronts, giving enough span for fingers to hook behind the lip. The anodized oil rubbed bronze finish lets the pull visually blend into darker cabinet finishes or contrast against lighter fronts while staying within the same oil rubbed bronze family as other decorative hardware and moldings. As a handle and pull component, it fits naturally into layouts that favor minimalist tab hardware over larger projected handles, supporting streamlined banks of cabinets in kitchens, baths, or casework runs that use 3/4 inch material.
The fixed 3 inch center to center dimension defines the screw hole spacing so installers can rely on a single drilling pattern, which improves accuracy and speeds repetition when producing multiple cabinet fronts. Matching this, the 3-7/8 inch overall length gives a predictable visual footprint to reference when aligning the pull to panel edges and reveals. The flush mortise mounting design requires routing a pocket, but once cut, that pocket locates the pull precisely in both depth and position so each installation seats the same. Designed for 3/4 inch material thickness, the body depth and fastener path match standard cabinet stock, so the #6 x 5/8 inch screws tie the pull securely into the door or drawer front without excess protrusion. Together, these defined measurements and mounting details help keep alignment tight and reduce rework across the job.
The EPCO DP412-ORB tab pull has a 3 inch center to center dimension, which sets the screw spacing and streamlines jig setup for repetitive cabinet drilling.
The EPCO DP412-ORB pull has a 3-7/8 inch overall length, creating a compact but visible grip area along the cabinet door or drawer edge.
The EPCO 3 inch center to center tab pull is specified for 3/4 inch material thickness, aligning with standard cabinet door and drawer front construction.
The flush mortise mounting seats the EPCO DP412-ORB pull into a routed pocket, keeping the hardware nearly level with the surface for a low-profile cabinet face.
The EPCO DP412-ORB tab pull has an anodized oil rubbed bronze finish, supporting coordination with other oil rubbed bronze decorative hardware.
The EPCO 3 inch center to center tab pull is specified with #6 x 5/8 inch screws, a common size that provides solid bite in 3/4 inch cabinet stock.
The EPCO 3 inch center to center tab pull in anodized oil rubbed bronze combines fixed 3 inch screw spacing, a 3-7/8 inch overall length, and flush mortise mounting to support clean, consistent cabinet fronts. With sizing matched to 3/4 inch material thickness and a defined oil rubbed bronze finish, it aligns with standard cabinet construction and decorative hardware choices. For projects calling for low-profile tab pulls that still give a usable edge grip, this EPCO DP412-ORB pull offers the measurements and mounting style required to keep layouts uniform from one front to the next.
Sold In: 1 Each