Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 3 inch center to center tab pull provides a compact grip that lines up cleanly with standard 3 inch drilling, so existing jigs and layouts transfer directly from job to job without new measurements. The 3-7/8 inch overall length gives a little extra finger room past the screw centers, which helps users catch the pull comfortably on smaller doors or drawers. Its anodized polished aluminum construction creates a bright metal look while the anodizing treats the surface, so the finish stays consistent across multiple fronts. This pull installs as a tab style handle, keeping the working edge close to the panel face for a low-profile look. Branded as EPCO DP412-PA, it matches the part numbering used in shop paperwork and ordering systems, reducing ordering errors when repeating a successful hardware schedule.
The flush mortise mounting on this EPCO DP412-PA tab pull requires a recess cut, which allows the pull body to sit into the door or drawer edge so only the working lip is exposed. That low projection profile reduces interference with nearby panels and helps fronts slide past each other in tight reveals. With a 3 inch center to center layout, installers can rely on a known dimension when positioning the pull along the edge, tying into standard cabinet drilling patterns. The pull is specified for 3/4 inch material thickness, so when it is set into the mortise, the geometry lines the gripping edge with the face of common cabinet stock, giving a familiar reach and feel across different projects.
This EPCO 3-7/8 inch length tab pull fits decorative hardware layouts in cabinet and drawer applications where a minimal projection is important. Using a 3 inch center to center dimension, it suits fronts that follow the widely used 3 inch handle spacing, which keeps drilling patterns consistent from kitchen to shop storage. The flush mortise mounting style places the body into the edge of 3/4 inch thick material, so the exposed lip runs close to the front surface. That configuration supports installations on upper cabinets, base cabinets, or drawer stacks where adjacent fronts are set with tight gaps, helping the hardware stay within the reveal. The anodized polished aluminum surface contributes a uniform metal look that coordinates across multiple doors and drawers in the same run.
The 3 inch center to center measurement on the EPCO DP412-PA establishes a fixed drilling pattern that carries across many cabinets, allowing jigs or CNC programs built around 3 inch spacing to run efficiently from job to job. Its 3-7/8 inch overall length gives the user more finger area beyond the mounting holes, which helps when opening smaller doors or short drawer fronts where hand clearance is limited. The pull is designed for 3/4 inch material thickness, so when the flush mortise is cut to receive the pull, the geometry places the gripping edge at a consistent distance from the panel face, supporting uniform feel across a bank of cabinets. The anodized polished aluminum construction manages the surface of the metal, so finished installations maintain a consistent sheen that aligns with other aluminum hardware in the project.
The EPCO DP412-PA tab pull has a 3 inch center to center dimension, which matches common cabinet drilling patterns and supports efficient layout using existing jigs.
The EPCO DP412-PA measures 3-7/8 inches in overall length, giving extra grip area beyond the screw centers for comfortable use on doors and drawers.
The EPCO DP412-PA uses flush mortise mounting, so the pull sits into a recess in the edge and keeps a low profile against the cabinet front.
The EPCO DP412-PA is specified for 3/4 inch material thickness, aligning the grip with typical cabinet door and drawer stock.
The EPCO DP412-PA is an anodized polished aluminum tab pull, giving a bright metal appearance with an anodized surface treatment.
The EPCO DP412-PA uses two #6 x 5/8 inch screws, which match common cabinet hardware tooling and support a secure connection at 3 inch centers.
The EPCO 3 inch center to center tab pull DP412-PA ties a common 3 inch drilling layout to a flush mortise design for 3/4 inch material, so runs of doors and drawers share the same hardware geometry. With a 3-7/8 inch overall length and anodized polished aluminum construction, it delivers a consistent grip area and coordinated metal finish across cabinets. For projects organized around EPCO decorative hardware and standard 3 inch spacing, this tab pull fits neatly into existing shop workflows.
Sold In: 1 Each