Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP414-BL tab pull gives a defined 1-7/8 inch center to center drilling layout, so hole spacing is clear when laying out doors or drawer fronts. The overall 3-7/8 inch length creates a slim, low-profile grip that suits modern cabinet lines while still giving fingers a consistent edge to pull from. An anodized satin black finish on the aluminum body provides a uniform dark appearance that pairs cleanly with contemporary casework. The pull is designed as a tab style, so it presents a compact edge along the top or side of a panel instead of a bulky projection into the room. This format helps keep fronts visually clean while still providing a repeatable handhold point. The branded EPCO part number DP414-BL matches the listed measurements, helping installers match this pull with drawings or repeat orders on larger jobs.
The flush mortise mounting design allows this EPCO DP414-BL tab pull to recess into the cabinet material, so the visible portion stays tight to the panel edge. This matters when a job calls for low-profile hardware that does not interrupt door swing or drawer clearance. With a center to center of 1-7/8 inch, drill points are well defined for jigs or line boring setups, which supports repeatable mounting across whole runs of cabinets. The pull fits material thickness of 13/16 inch, aligning with many standard cabinet fronts so the mortise depth and screw engagement stay within common construction. Its 3-7/8 inch overall length lets installers position the tab to give enough finger access without dominating narrow drawer faces. The anodized satin black aluminum construction provides a coordinated look with other dark decorative hardware specified on the same project.
This EPCO DP414-BL tab pull is suited to cabinet doors and drawer fronts that use 13/16 inch material, because the pull is designed around that thickness. On panel edges, the flush mortise mounting lets the pull sit into the edge rather than on the face, which keeps the front surface largely uninterrupted. Installers can use the 1-7/8 inch center to center spacing to align the pull consistently near corners or along top edges of doors, helping line up hardware across banks of cabinets. The 3-7/8 inch length supports use on both doors and drawers by providing a continuous gripping edge while still working visually on smaller fronts. Being categorized under decorative hardware and moldings as handles and pulls, EPCO, the part fits well wherever matching EPCO pulls and handles are specified on built-ins or casework.
The clearly stated 1-7/8 inch center to center measurement on the EPCO DP414-BL tab pull allows installers to set up drilling jigs or CNC programs with confidence, which reduces layout variation between units. Its flush mortise mounting means the cabinetmaker cuts a pocket so the pull nests into the edge, helping achieve a precise, repeatable hardware position from piece to piece. The defined 13/16 inch material thickness target keeps the mortise relationship to the panel edge consistent, so the visible lip of the pull presents the same reveal across a run. With a 3-7/8 inch overall length, the pull spans enough distance for comfortable grip while giving installers a fixed dimension to reference when centering on drawer faces. The anodized satin black finish provides a stable color reference when coordinating other hardware on shop drawings and purchase lists, keeping finish selections aligned across a project.
The EPCO DP414-BL tab pull uses a 1-7/8 inch center to center spacing, so hole locations follow that dimension when setting up drilling or boring patterns.
The EPCO tab pull has a 3-7/8 inch overall length, giving a slim but usable gripping edge that works across both doors and drawer fronts.
The EPCO DP414-BL uses flush mortise mounting, so the pull recesses into the material edge, creating a low-profile install and a clean cabinet front line.
The EPCO DP414-BL is designed for material thickness of 13/16 inch, aligning with many cabinet door and drawer front constructions for consistent fit.
The DP414-BL pull has an anodized satin black finish on aluminum, providing a uniform dark appearance that coordinates with other black hardware.
The EPCO DP414-BL is categorized as decorative hardware and moldings under handles and pulls, EPCO, which groups it with other EPCO pulls for projects.
The EPCO DP414-BL tab pull combines a 1-7/8 inch center to center layout, 3-7/8 inch overall length, and flush mortise mounting to support clean, repeatable cabinet hardware installs. Its design for 13/16 inch material thickness aligns with common cabinet construction, while the anodized satin black finish on aluminum coordinates with other black decorative hardware. For projects specifying EPCO handles and pulls, this defined DP414-BL part number provides a consistent choice when planning, ordering, and installing matching tab pulls across a full run of cabinetry.
Sold In: 1 Each