Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 1-7/8 inch center to center tab pull gives a compact gripping point for cabinet and furniture fronts where a low-profile pull is preferred. The anodized oil rubbed bronze finish provides a dark metallic look that coordinates with other bronze-toned decorative hardware choices in a project. The overall 3-7/8 inch length spans a wider section of the door or drawer edge, spreading pull force along the material. Center to center 1-7/8 inch hole spacing sets a precise drilling layout for repeatable installation across multiple fronts. The pull is designed for flush mortise mounting, so the body sits into a routed pocket for a streamlined edge with no projection beyond the face. For material thickness 13/16 inch, the geometry is matched so the pull seats correctly in the mortise and functions smoothly when installed on that thickness.
The flush mortise mounting design means the pull sits in a recess routed into the cabinet or drawer front, creating a low-profile edge that feels smooth in hand. Center to center: 1-7/8 inch defines the drilling or boring pattern, so once jigs are set to that spacing, the installer can repeat the process quickly on multiple fronts. Length: 3-7/8 inch shows how much of the edge will be occupied by the pull, which helps position it relative to door corners or drawer sides. For material thickness 13/16 inch notes the intended stock thickness so the mortise depth and pull geometry work together as designed when fitted into that thickness.
The EPCO 1-7/8 inch center to center tab pull works on cabinet or furniture fronts where the material thickness is 13/16 inch, so it integrates into common panel stock used in many shop-built projects. Its 3-7/8 inch length lets the pull span a practical section of the edge, which gives users a defined place to grip without dominating the front visually. The oil rubbed bronze finish gives a consistent dark appearance across multiple pulls in a kitchen or office, tying doors and drawers together visually. Because the pull is part of the Decorative Hardware and Moldings category, it suits applications where appearance matters alongside day-to-day hand use on active doors and drawers.
The flush mortise mounting requirement means installers route a pocket so the pull body nests into the material, creating an edge detail that feels integrated rather than surface-mounted. With the 1-7/8 inch center to center dimension fixed, jigs or templates can be set once for drilling or boring, then used across an entire run for consistent alignment. The 3-7/8 inch overall length helps define mortise length and distance from the door or drawer corner, supporting straight sight lines when multiple pulls are lined up. Matching the pull to material thickness 13/16 inch supports predictable seating depth so the tab is positioned at an ergonomic point on the edge, which can reduce adjustment time during installation.
The 1-7/8 inch center to center dimension sets the spacing between the mounting holes, guiding drilling layouts and helping align multiple EPCO DP414-ORB pulls consistently across a project.
The EPCO DP414-ORB tab pull is used on cabinet and furniture fronts in decorative hardware applications, providing an edge grip in kitchens, offices, or other built-in installations.
The flush mortise mounting design requires routing a recess so the pull sits into the material, creating a streamlined edge and a built-in look along cabinet or drawer fronts.
The 13/16 inch material thickness detail indicates the pull geometry is matched to that stock thickness, helping the tab sit correctly when mortised into cabinet doors or drawer fronts.
The 3-7/8 inch length describes the full span of the pull along the edge, giving a defined gripping zone and helping align multiple pulls visually on adjacent fronts.
The anodized oil rubbed bronze finish provides a dark metallic appearance, allowing this pull to coordinate with other oil rubbed bronze decorative hardware in the same installation.
The EPCO 1-7/8 inch center to center tab pull with anodized oil rubbed bronze finish brings a compact, edge-grip solution to cabinet and furniture projects that use 13/16 inch thick material. With a 3-7/8 inch overall length and flush mortise mounting, it supports clean-lined fronts and repeatable layouts using the fixed 1-7/8 inch hole spacing. For projects needing a dark bronze pull that integrates into the material instead of projecting from it, the DP414-ORB format offers a defined size and mounting style ready to match existing or planned decorative hardware choices.
Sold In: 1 Each