Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 2-1/2 inch center to center pull is a satin brass handle designed for cabinet and drawer use where a compact, consistent grip is needed. The 2-1/2 inch (64 mm) center-to-center dimension sets precise hole spacing, which helps installers lay out drilling quickly and repeat the same pattern across multiple fronts. The overall 3-1/16 inch length keeps the pull proportionally small, which suits narrow drawer fronts or doors without crowding adjacent hardware. An anodized satin brass finish gives the aluminum pull a muted metallic look, which works well when a softer appearance is preferred over bright brass. The aluminum construction keeps weight low, which matters on lighter doors or thin drawer fronts where heavy hardware is not desired. This pull is part of the EPCO handles and pulls line, so it fits projects that standardize on that brand for decorative hardware.
This EPCO DP418-B pull uses a 2-1/2 inch center to center dimension, so drilling two mounting holes on that spacing aligns the posts correctly for straight mounting. The 3-1/16 inch overall length leaves some margin beyond the hole spacing, which helps visually balance the pull on the panel face. Surface mounting lets the pull fasten directly to the face of doors or drawers, so only straight-through holes are required. The pull is specified for any material thickness, which means common cabinet door and drawer front builds can all be handled with the same part. Mounting with 8-32 x 1 inch screws ties directly into a widely used machine-screw size, which supports predictable thread engagement in the pull body during installation.
This anodized satin brass cabinet pull fits projects that call for a 2-1/2 inch center to center layout, such as replacement of existing pulls drilled on that spacing or new work standardizing on 64 mm centers. The relatively small 3-1/16 inch overall length suits application on modest drawer fronts or narrow stile-and-rail doors, so the hardware stays in proportion to the panel size. Because the pull mounts on the surface and works with any material thickness, it transitions well between different cabinet lines within the same space, from thicker decorative doors to thinner utility fronts. The satin brass finish gives a subdued brass appearance, which can support designs that need brass tone without a high-gloss look. As a member of the EPCO handles and pulls category, this pull aligns with projects where other EPCO decorative hardware is already specified.
The defined 2-1/2 inch (64 mm) center to center measurement allows installers to rely on standard drilling jigs or shop-built templates, which produces consistent alignment across long cabinet runs. Having a 3-1/16 inch length tied to that center spacing helps visually center the pull on narrow fronts, which reduces layout adjustments from piece to piece. Surface mounting without mortising keeps the workflow to simple drilling and screw fastening, which is efficient for both shop assembly and on-site installation. The pull's suitability for any material thickness means the same part number covers doors and drawers of different build-ups within one project, reducing part variation to track. Mounting with common 8-32 x 1 inch screws allows consistent torque and feel when tightening, which supports uniform hardware seating and alignment on finished cabinetry.
The EPCO DP418-B pull has a 2-1/2 inch (64 mm) center to center dimension, which sets the exact hole spacing required for drilling and alignment on cabinet doors or drawers.
The pull length is 3-1/16 inch, giving a compact profile that works well on smaller drawer fronts or narrow cabinet doors while still covering the 2-1/2 inch hole spacing.
The EPCO DP418-B uses surface mounting, so it fastens directly to the face of the cabinet material using straight-through holes at the specified center to center distance.
The pull is specified for any material thickness, which lets it serve across a range of cabinet doors and drawer fronts within the same project layout.
Mounting uses 8-32 x 1 inch screws, providing a standard machine-screw thread that installers commonly use in cabinet and drawer hardware applications.
The DP418-B pull has an anodized satin brass finish, giving the aluminum handle a muted brass tone suitable for decorative cabinet hardware installations.
The EPCO DP418-B anodized satin brass pull pairs a 2-1/2 inch center to center layout with a 3-1/16 inch overall length, which suits compact cabinet and drawer fronts. By using surface mounting and 8-32 x 1 inch screws, it fits smoothly into standard cabinet hardware drilling patterns. For projects calling for satin brass tone with defined 64 mm centers, this pull offers a single part that covers varied material thicknesses across doors and drawers. Add this EPCO handle to cabinet runs where consistent spacing, compact size, and satin brass appearance are part of the hardware plan.
Sold In: 1 Each