Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 2-1/2 inch center to center pull describes a decorative handle designed for projects that need a 2-1/2 inch (64 mm) center-to-center drilling pattern, so it aligns with standard cabinet hole spacing for straightforward replacements or new layouts. The pull has a 3-1/16 inch overall length, which keeps the footprint compact on smaller doors or drawers while still offering a defined gripping area. The anodized oil rubbed bronze finish provides a dark, muted metal look, giving cabinetry a consistent appearance when matching other oil rubbed bronze components in the same space. As part of EPCO decorative hardware and moldings handles and pulls, this unit serves as a basic working handle for cabinets, closets, or similar casework where a simple pull is needed to open and close fronts during everyday use.
The stated 2-1/2 inch center to center dimension defines the spacing between the two mounting points, so installers can drill or reuse holes at that distance for consistent handle alignment along a run of fronts. With a 3-1/16 inch length, the pull occupies slightly more space than the hole spacing itself, which leaves edge clearance at both ends and helps visually center the pull on rails or drawer fronts. This pull is described as suitable for any material thickness, allowing it to be mounted on doors or drawers built from various stock thicknesses within typical cabinet construction ranges. The surface mounting approach uses the front face as the contact point, so measuring and marking happens on the exterior side of the door or drawer for straightforward layout before fastening.
The EPCO DP418-ORB pull, with its 2-1/2 inch center to center layout, fits applications where that hole spacing is planned across doors or drawers, such as kitchen cabinets, bath vanities, or built-in storage with consistent handle spacing. Its 3-1/16 inch overall length allows placement on medium and smaller fronts, so installers can run the same part across wall cabinets, base units, and narrow drawer stacks without the pull visually overpowering the panel width. The oil rubbed bronze finish suits projects where a darker decorative hardware tone is selected, aligning this pull with other similarly finished items in the decorative hardware and moldings handles and pulls category. Because it is suitable for any material thickness, this pull can be used on cabinet faces constructed from different panel thicknesses or door styles within the same installation, maintaining hardware uniformity from unit to unit.
The 2-1/2 inch center to center measurement provides a fixed drilling reference, supporting jigs or templates set to that spacing so installers can repeat the same pattern quickly across multiple fronts. With a surface mounting configuration, the pull contacts the outside face of the cabinet, so once holes are drilled at the 2-1/2 inch spacing, it can be positioned and fastened without additional mortising. The product is identified by manufacturer part DP418-ORB, which helps installers and shops reorder the exact same pull when expanding a run of cabinets or matching an existing job. Being part of the EPCO handles and pulls class under decorative hardware and moldings also ties this pull into a broader family of cabinet components, which can simplify hardware standardization across projects that specify EPCO products.
The EPCO DP418-ORB pull uses a 2-1/2 inch (64 mm) center to center spacing, which guides drilling and ensures alignment for doors or drawers laid out to that dimension.
The EPCO DP418-ORB pull has a 3-1/16 inch overall length, so it slightly overhangs the mounting hole spacing and fits well on small to medium cabinet fronts.
The EPCO DP418-ORB pull has an anodized oil rubbed bronze finish, giving it a dark metallic look that coordinates with other oil rubbed bronze decorative hardware.
The EPCO DP418-ORB pull is described for surface mounting, meaning it sits on the cabinet face and uses front-side positioning for installation.
The EPCO DP418-ORB pull is stated for any material thickness, so it works across typical cabinet door and drawer front constructions in the same project.
The DP418-ORB designation identifies this specific EPCO anodized oil rubbed bronze pull, helping match existing installations or repeat the same model across jobs.
The EPCO 2-1/2 inch center to center pull offers a defined 2-1/2 inch (64 mm) spacing, which helps plan or match drilling patterns across cabinetry runs. Its 3-1/16 inch length and surface mounting style suit many cabinet doors and drawers where a compact handle is preferred on the face. The anodized oil rubbed bronze finish ties in with other dark-toned decorative hardware, aligning this pull with projects built around that color theme. For work that specifies EPCO handles and pulls in oil rubbed bronze, this DP418-ORB model provides a consistent option to carry through a full room or multi-room installation.
Sold In: 1 Each